M101A2 home made adjustable leg handle

[therealsundance]

Had these made at work from some scrap material. Will give them a try at home when I get there. I will need to locate and drill the hole for the retainer clip.

Made from SCH 80 and 40 pipe and 1/4" plate. Of course the pipe is reversed to where they should be, but I think it will be plenty strong. **** happens.
Now to find some paint for them.

TRS

 

[OLDCHEV4X4]

That will work.
Did you make any extra adjustable leg assembly's while you were at it?

 

[therealsundance]

Ummm...nope.

Love the avatar.

 

[hwcurtice]

Pictures after install, right?

 

[therealsundance]

Sure, I have a camera.

 

[rfischba1]

Nice job.

They are nice, any for sale?

 

[Nick]

Did ya make the one leg longer than 6 1/4"??
Ive noticed that mine hits the frame when cranking it. If the part the has the slot in it that actually turns the crank on the leg were longer, it wouldnt happen.. get it out away from the frame more.

.

Looks good though.

Nick

 

[therealsundance]

Here are some pics and a video:




http://img826.imageshack.us/img826/6826/qrv.mp4

 

[therealsundance]

Did ya make the one leg longer than 6 1/4"??
Ive noticed that mine hits the frame when cranking it. If the part the has the slot in it that actually turns the crank on the leg were longer, it wouldnt happen.. get it out away from the frame more.

.

Looks good though.

Nick

Yep, the pipe is 7" plus the 1/4 plate.

 

[Recovry4x4]

These shoulld be saleable. I have handles for both of my trailers but had too scrap arund to find them.

 

[Nick]

Yep, the pipe is 7" plus the 1/4 plate.

Good deal, yup as 4x4recovery says, definately sellable

Nick

 

[therealsundance]

[Dr. Evil]One Million Dollars[/Dr.Evil]

 

[beltfedonly]

Crank handle.

I would be interested in one!

 

[MIhunter]

Same here.

 

[therealsundance]

So, what are you guys willing to pay?



If I can get it done, it will be a small run of them.

 

[beltfedonly]

Jack handle.

Put us a fiqure together as to what you want for one.
Thanks

 

[therealsundance]

Finally finished them.

 

[MIhunter]

If you have a figure in mind, PM me and let me know. I could use one for the right price and don't mind paying for it.

 

[therealsundance]

I am looking at $60 + shipping when I get the material. You guys need to remember that these are all hand made and not done with a milling machine and presses.


I don't think I will sell these as I need one and they are prototypes with a hole in the steel you can't see.