scrambled
New member
- 125
- 3
- 0
- Location
- Marietta,Ga
I won a couple of M1031s from Warner Robbins. Of course, all of the driveshafts are bent from forklift bites. I am wondering if the rear driveshaft from a 1008 is close to the same. I know both the 205 and 208 were slip yoke cases and the length of the case is very close.
My plan is to trailer one truck back while slapping in my good 1008 driveshaft and driving anohter one home behind it (at breakneck speeds)
Anyone swapped rear shafts?
Thanks,
Travis
My plan is to trailer one truck back while slapping in my good 1008 driveshaft and driving anohter one home behind it (at breakneck speeds)
Anyone swapped rear shafts?
Thanks,
Travis