M105A2 brake part #'s

[jasonjc]

As the title says does any one have the civi part #'s for the brakes on the M105 M103 trailer. They seem to use the same brakes as my lube trailer and I want to rebuild the MC,wheel cyclinders and air pots. The TM for the lube trailer lists part numbers that seem to be Wagners, but looking them up online at Oreilys and NAPA come up blank.

M/C kit FC13625
W/C kit F13635
Air pot diaphragm 201271 (bendix)

Does any one know if these are good #'s . I may try and go to a parts store next week,but I hate it when I get the deer in the headlight look from the guys behind the counter.

Does any one have a Wagner brake book on PDF??

 

[jasonjc]

Well as I thought O'reilys and napa both had the deer in the headlights look. For the MC and WC. Truck pro can get the 201271 I did not talk to them will check with them on the others.

 

[doghead]

Kipman has these kits.

 

[jasonjc]

For the wheel cylinder cups Napa has them as: up 14451. They are a 1 1/4" ring type cup.

 

[jasonjc]

Napa # for the M/C kit is 100

 

[srodocker]

thanks for the #'s i need them badly as mine need redone!

 

[WillWagner]

Do we have a part cross ref section yet?

 

[jasonjc]

here's some pic's of the M/C kit frist is the new kit, 2nd is old parts, 3rd is side by side and last is the box.

 

[jasonjc]

Here are pic's of the new ring cups for the wheel cyclinders.1-5 the one on the left is the new ring the one on the right is the old ring.

 

[jasonjc]

I should be picking up the new dust boots for the wheel cyclinders today will let you know the # and pic's later to day.

 

[rosco]

The MC is a wagner lockheed, 1&1/16" bore w/NAPA # shown above. Usually you can locate the proper part # for a MC by using the casting # on the side of the MC. Its the same for the Bolster Trailer

 

[jasonjc]

I found the NSN and P/N for the newwer clamp type air brake chamber. Its a Haldex N30171 , NSN 2530-00-106-4377.

 

[quickfarms]

do you have a source for the air cans?

 

[jasonjc]

I got that one off e-bay. I called truck pro with the Haldex #. They had to call Haldex about it and Haldex told them that it was military only. And that the buyer had to have a military acount to order it. I also call the truck parts place that has the ad's on here, they called me back and said it would take 60-90 day and was a lot of $$. Like over $100 I think they said. This one does cross to the old one so it is the right one to get/use.

 

[jasonjc]

Opps I got got side tracked. It was brought to my atention that I did not get the dust boot #'s.

Well this is what NAPA got for me. We looked thought the book and the pic in the book looked to match up good but what they sent does not look the same.

The P/N is 14492

and here is what they look like, frist is the old one the rest are the 14492's they look small but seem to lock on good.

 

[jasonjc]

The copper washer for the banjo bolt are:

These are NAPA numbers

The bigger one is 1243 (big # on box)
1144 (smaller # on box under the 1243)
301H9456 (on the bag inside the box)

The smaller one is 1242 (big # on box)
1147 (smaller # on box under the 1242)
301H9434 (on the bag inside the box)

Ans the steel lines are 1/4" with 7/16"x24 fittings.