HID install
Got the new 12 volt HID headlight kit from "those military guys". It was pretty simple, just a few problems I ran into:
1) I could not get the wires to fit through the hole in the bucket. This is where number 91 passes through; I drilled it out just a bit bigger to 5/8. I’m not sure if I could of forced it through but didn't want to take a chance breaking the connector. The grommet seems too big but it does fit perfect.
2) I broke a solder joint connecting up with existing "military" connector; maybe I got to aggressive with it but re-soldered it back on.
3) The headlights didn't fit tight like the old ones do, I put some silicone on the tabs and let it dry and that provided a cushion between the small headlight bracket and the bucket.
4) When all hooked up they didn't work, called "those military guys" on Sunday and had to reverse polarity on a connector, just unplugged and turned 180 and plugged back in. Nice they will talk to you on the weekends.
Over all Im pretty happy with the lights. I didn't want to go LED due to the snow that I drive in from time to time. These do produce heat. Now Im going to get behind a pruis and watch them crap their pants.