• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M109 camper conversion

OPCOM

Moderator
Steel Soldiers Supporter
3,657
27
48
Location
Dallas, Texas
A thought about the rears there. I see the center sections are removed, but if you left one in, you could belt it to an automotive alternator and keep a couple of 12V batteries charged. That and a solar panel if you like, but the idea is that whever you got where you wanted , the batts would be full and you'd have 12V for lights etc immediately. I guess the center sectiosn were removed to get rid of friction and weight though.
 

phil2968

Active member
2,591
18
38
Location
Lakeland, Florida
A thought about the rears there. I see the center sections are removed, but if you left one in, you could belt it to an automotive alternator and keep a couple of 12V batteries charged. That and a solar panel if you like, but the idea is that whever you got where you wanted , the batts would be full and you'd have 12V for lights etc immediately. I guess the center sectiosn were removed to get rid of friction and weight though.
That idea may be hard to do since the chunks are sitting at my brothers house in Florida awaiting installation in his deuce!
 

zout

In Memorial
In Memorial
7,744
154
63
Location
Columbus Georgia
I know what its like to re-skin trailers when I worked for Fruehauf years ago - sometimes the framework would be standing just like yours. A lot of difference between sheet aluminum and sheet steel when hanging that stuff.

Take all your conditions into factor and it is work - not even talking about the humidity added in.

Great looking work to both of you on the progress of the trailer - you will have a prize unit when it is done.
 

mdmorgan

AM3 U.S. Navy
1,085
102
63
Location
Forsyth, Ga.
What gauge of sheet did you use? It gets heavy fast when you add up that many sheets. Don't want flimsy, but you don't want a gunsafe either.
original skins were 18 ga. we are putting 20 ga. so just a hair lighter, and we are not putting the original panels back on the inside, i figure i'm saving at least a couple hundred pounds at least. I plan on weighing it when i'm done.
 

mdmorgan

AM3 U.S. Navy
1,085
102
63
Location
Forsyth, Ga.
I know what its like to re-skin trailers when I worked for Fruehauf years ago - sometimes the framework would be standing just like yours. A lot of difference between sheet aluminum and sheet steel when hanging that stuff.

Take all your conditions into factor and it is work - not even talking about the humidity added in.

Great looking work to both of you on the progress of the trailer - you will have a prize unit when it is done.
We had actually thought about putting aluminum on but then we saw how much it was going to cost, these sheets are heavy but thats what the tractor is for.

Oh, i agree it is work, no doubt about it, i just meant that compared to drilling aircraft skins its easy.

I'm sure the outside will look great when i'm done, but i can only hope the inside looks half as good as yours when i get to that.
 
Last edited:

army70deuce

Member
106
3
18
Location
Anderson, SC
Great work on the trailer, and while I don't know what the paint would look like I recommend a giant C-130 on the side. Been riding in those a bunch lately, glad to know we have such hard workers keeping them flying and in good shape. Appreciate the hard work.
 

mdmorgan

AM3 U.S. Navy
1,085
102
63
Location
Forsyth, Ga.
Ok, got the skins drilled for the left and front, and all cleaned up, primed and ready to be shot on. we will start shooting tonight after it cools down if its not raining.

Also started stripping paint off the frame and suspension with a needle gun, neat little tool, by far the fastest way to remove carc that i have found yet. It is a Harbor freight unit, its listed as a mini needle scaler, on sale $19.99 and if you can find a 20% off coupon in a mag, even better!
what was done in the pics took only a couple hours.
 

Attachments

zout

In Memorial
In Memorial
7,744
154
63
Location
Columbus Georgia
I have a battery operated one to stir my Crown and Cokes W/ice - makes a very nice Crown slush.


Those are very cool tools and gobbles up old paint. How is it going on the skin mounting.
 

dc3coyote

New member
1,393
19
0
Location
Chattanooga TN
GAHHH needle guns, keep that thing away from me, they are pure evil, used by Satan himself on pour sailors who drink a little too much the night before....
That said I am quite familiar with the workings of those things. They do remove paint and a little surface rust like no other tool.
 

mdmorgan

AM3 U.S. Navy
1,085
102
63
Location
Forsyth, Ga.
GAHHH needle guns, keep that thing away from me, they are pure evil, used by Satan himself on pour sailors who drink a little too much the night before....
That said I am quite familiar with the workings of those things. They do remove paint and a little surface rust like no other tool.
while this is my first time using one, i have had some experiance with what they sound like. I always worked nights when we went out to sea and for about a week one deployment right about the time i would fall asleep someone would start chipping paint on what sounded like the wall right next to my head, it was so bad i could hardly fall asleep with earplugs in. It made for a very long and exhausting week.
 

Ferroequinologist

Resident railroad expert
Steel Soldiers Supporter
4,807
736
113
Location
Liberty Hill, SC
Needle guns work great. One time we were out to sea, and I was so tired... I ductaped the handle done, so it would constantly run, put on a pair of dirty googles, so no one could see my eyes. I sat down in the bildge wedged between the seawater service pump base and the fire pump base, and had the needle gun over my shoulder. Then I would fall asleep. By the end of the week, it had depressed about a half dollar sided section of the 3/4 steel mounting plate!
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks