M109 Power Cable

[sarge_3ad]

Just a shamless plug, but check the classified here.

2 ea. Power cables for a M109A3 Shopvan. (Very hard to find) - Steel Soldiers::Military Vehicles Supersite

 

[MoggyMind]

M109A3 120V plug

I think it might be Cooper Crouse-Hinds Service Inlet Plug Model: APJ2251. I will be checking further into this.

 

[Floridianson]

O and welcome

 

[jatonka]

If people are looking for this plug, you can change to Hubbell or Daniel Woodhead NEMA connector that will fit in the van housing , then use appropriate plug to bring ground power in. I ddi the cross country M109 this way. I have found some GI cables since then in 2008 and will use them until I need to make more NEMA setups. Just a thought for the G.O.O.D guys

 

[wsucougarx]

I noticed there are a few variations of plugs used on the 109. Two prong, three prong, and a four prong plug. The majority I have seen are the two prong ones. I was lucky to find one on ebay after a 2 year search. Luckily the guy didn't know what he had and I ended up winning a 50 ft cord for $40.

 

[Bad_Carp]

I noticed there are a few variations of plugs used on the 109. Two prong, three prong, and a four prong plug. The majority I have seen are the two prong ones. I was lucky to find one on ebay after a 2 year search. Luckily the guy didn't know what he had and I ended up winning a 50 ft cord for $40.

Please understand that I mean zero offense by this, but you suck!

Nice find and what a steal!

 

[wsucougarx]

No offense taken. I guess my point is to just keep your eyes open and search. I literally searched at least once every 3-4 days on ebay before I found her.
There was no way I was going to pay the $150-200 for just the plug itself and another 100 or so on the cable. Well, I suppose I would have if things got desperate.

 

[wikallen]

Mine had a huge 100amp panel in the back, so I have a 4 prong plug on my truck. There was a blank plate below that, and that is where I added my stainless 30amp marine plug. I had doubt about ever finding a good price on that 4 prong plug at the top.

 

[MoggyMind]

I found these plugs on ebay. Crouse Hinds 30A, 250, v pin & sleeve conn, BP 732. I bought two. I am hoping they will work but don't know till I receive them.

 

[BigRig379]

I'm sure you found out as I did but a 30amp plug will not work. It requires a 60amp. I bought a 30amp thinking I wouldn't need 60amps for what I use but that's not the case. I bought one a used one from Appleton I don't remember the number off hand but I got it off here.