M1151A1 6.5L TD: Does eng have electronic control module?

[greyner]

Hi All,

I'm a new member and am part of an engineering team that's mounting a generator on the front of the 6.5LTD in the M1151A1 so that this MV can drive around w/ kwatts of available power.

My question is: Does the engine for this MV have a PCM or ECM? Is there a electronic control module? Earlier HMMwv's w/ 6.5LNA engines did not have an ECM. My goal is to cumminicate w/ ECM for torque control inputs, like increasing the idle speed when cranking out power, so engine doesn't stall. Thanks for any feedback!

Regards,

Greg

 

[Westech]

you can add a cold start switch from a cucv and it will bump up the rpm 200 give or take. any more then that and your on a fab mission. you do know there is a military genrator unit that is a bolt on already right? its like 5k watts and bolts on the engine where the alt goes or something like that. i will post a pic.


here is a link

http://www.ccatsocal.org/SuccessStories/ss_aura_1206.html

 

[greyner]

Thx for the info. We already have the gen mounted on a early HMMWV (early 90's?). It produces over 30 kW; it's a custom application. Currently we increase engine power w/ an electrical actuator strapped to control rod cable that we can control as needed. The M1151A1, i suspect, has an electronic engine control and was thinking there might be a way to interface to it to input a torque command.

Regards.

 

[Chief_919]

Military 6.5's are strictly mechanical injection, no electronic control of the computer at all.

I work on them for the military, so any specs you ned let me know. But the same system you used for the earlier one will work on the 6.5's.

 

[greyner]

Ok, didn't know that. I thought maybe the new 6.5L"Optimizer" TD engines might have an ECM or PCM. I guess I'll dig around for a M1151A1 engine wiring diagram. Thanks.

 

[pep3709]

Anyone know how I can get a updated TM or ietm for a M1151a1 with complete electrical schematics?

 

[Action]

They are in the back of the -387 TMs from 2009.
Why dont you use the hand throttle lock under the dash while the genny is running?

 

[Retiredwarhorses]

The OP is from 2009