-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M116A3 ideas and worth
- Thread starter jimbo913
- Start date
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 751
- 113
- Location
- Cincy Ohio
I love mine! If you use it for anything, I doubt you'd ever sell it.
maxtor
New member
- 274
- 3
- 0
- Location
- California
I turned one of our M116a3 trailers into a wood hauling trailer. The other I modified to pull behind our Jeep for carrying water, fuel, supplies, tent, misc.
Some use them to haul water barrels.
Unless you find someone who has a need, they are difficult to sell.
Some use them to haul water barrels.
Unless you find someone who has a need, they are difficult to sell.
Last edited:
lfhoward
Member
- 65
- 40
- 18
- Location
- Philadelphia, PA
I am in the process of making an off-road camper out of my M116A3. It's a great platform to build something on.
I got it for $500 at auction plus fees, taxes, registration, etc. That could give you some idea of its worth, although I have seen them posted on Craigslist and Ebay for much more than that.
I got it for $500 at auction plus fees, taxes, registration, etc. That could give you some idea of its worth, although I have seen them posted on Craigslist and Ebay for much more than that.
Last edited:
harleyhouse
Well-known member
- 1,256
- 30
- 48
- Location
- Oakmont, Pennsylvania
Is it the flat deck with cover or just a frame and fenders? Please post some pictures.
I am looking for a M116a2,3 frame.
I am looking for a M116a2,3 frame.
Last edited:
John Galt
Member
- 205
- 0
- 16
- Location
- Fort Worth, TX
They are pretty rare around here. Last year on CL, I sold one (with a plate and wired for 7 pin) for $800.
John Galt
Member
- 205
- 0
- 16
- Location
- Fort Worth, TX
Looks like an aluminum chassis. Not sure on the value of that.
KsM715
Well-known member
- 5,149
- 142
- 63
- Location
- St George Ks
That's not a 116. It's one of the 1101/02 flat bed variants
glassk
Active member
- 998
- 6
- 38
- Location
- Hampton, GA
I got lucky
KsM715
Well-known member
- 5,149
- 142
- 63
- Location
- St George Ks
What does it say on the data plate? Maybe they still use m116 for the flat bed trailer but I would think in that configuration it would have to be M116a4. Don't those 1101/02 trailers have torsion bar suspension? Or are they still leaf springs.
Howdy,
I too was under the impression it was a m116a3
But now, after looking around, they have just grouped them in with the other names.
http://www.schuttindustries.com/Military/Trailers/Light-Tactical/LTT-TQG-NAME.aspx
Mine was at first known as M116A3 High-Mobility. I now see it would be a M1102
The trailer is torsion axle, has HMMWV tires and rims (run flats) high ground clearance, and is totally made from aluminum.
I just finished doing my lights on my trailer. Strange, I was ready to do and follow all the light bulb changes and stuff. I cut off the mil plug, wired in a RV 7-way, and everything works. Well, I mean, trailer marker lights, left and right turn signals, and brake lights. I did not change any bulbs.
OH, I am not sure if they are using a different wire, but the thing barely fit into the back end of the 7-way plug.
Trailer plate
I too was under the impression it was a m116a3
But now, after looking around, they have just grouped them in with the other names.
http://www.schuttindustries.com/Military/Trailers/Light-Tactical/LTT-TQG-NAME.aspx
Mine was at first known as M116A3 High-Mobility. I now see it would be a M1102
The trailer is torsion axle, has HMMWV tires and rims (run flats) high ground clearance, and is totally made from aluminum.
I just finished doing my lights on my trailer. Strange, I was ready to do and follow all the light bulb changes and stuff. I cut off the mil plug, wired in a RV 7-way, and everything works. Well, I mean, trailer marker lights, left and right turn signals, and brake lights. I did not change any bulbs.
OH, I am not sure if they are using a different wire, but the thing barely fit into the back end of the 7-way plug.
Trailer plate
Last edited: