M151 Front Fender Top Design Question

[lpcoating]

Looking for some input on the M151 front fender top design. This is the fender top only, not including what I would call the inner fender section (which is all one piece). When I made the fender tops for my A1, I stopped the inside edge (under the hood) at where the bend center line is. I'm going to weld the entire length and blend. When I'm done it will look like the original bend, or very close. The other option is to have about a 1" lip bent down that would lay over top of the inner fender and then get plug welded. I think most people would rather have the lip and do the plug welding. So that is the question, what do you guys think most will want?


Thanks.

Guy

 

[lpcoating]

Sorry guys, not sure what I'm doing wrong as I use to be able to copy my post from the 838 and the pictures would show. Now I'm just getting the photo bucket link.

 

[lpcoating]

Done deal, the guys on the 838 gave some input. Inner lip will be added...

Guy

 

[Lindsaym151]

That's what I would do! stronger, hidden ,longer lasting!