qman
New member
- 3
- 0
- 0
- Location
- Colorado Springs, CO
I have one of these stoves with the oil burner conversion. The Jerry can adapter has an o-ring that seals it when you press down on the clamp. The previous owner of mine replaced it by cutting out a rubber washer from some gasket material. That gasket was cracked so being that I didn't know better, I made a duplicate. Turns out I needed to double it up to keep it from leaking.
Anyway when I looked at my buddy's adapter I saw it had an o-ring. I need one of those o-rings. Does anyone know what size that o-ring is or where I can get them?
Here's the manual for it" http://www.liberatedmanuals.com/TM-10-4500-200-13.pdf
#28 on page 2-20 shows it as a "Gravity Feed Adapter Gasket".
Page 2-21 shows 5330-00-298-7165 as the part number and calls it a "GASKET, GRAVITY FEED ADAPTER B".
I've searched on that part # but can't find anything.
Anyway when I looked at my buddy's adapter I saw it had an o-ring. I need one of those o-rings. Does anyone know what size that o-ring is or where I can get them?
Here's the manual for it" http://www.liberatedmanuals.com/TM-10-4500-200-13.pdf
#28 on page 2-20 shows it as a "Gravity Feed Adapter Gasket".
Page 2-21 shows 5330-00-298-7165 as the part number and calls it a "GASKET, GRAVITY FEED ADAPTER B".
I've searched on that part # but can't find anything.