• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M1941 Tent Stove Question

qman

New member
3
0
0
Location
Colorado Springs, CO
I have one of these stoves with the oil burner conversion. The Jerry can adapter has an o-ring that seals it when you press down on the clamp. The previous owner of mine replaced it by cutting out a rubber washer from some gasket material. That gasket was cracked so being that I didn't know better, I made a duplicate. Turns out I needed to double it up to keep it from leaking.

Anyway when I looked at my buddy's adapter I saw it had an o-ring. I need one of those o-rings. Does anyone know what size that o-ring is or where I can get them?

Here's the manual for it" http://www.liberatedmanuals.com/TM-10-4500-200-13.pdf

#28 on page 2-20 shows it as a "Gravity Feed Adapter Gasket".

Page 2-21 shows 5330-00-298-7165 as the part number and calls it a "GASKET, GRAVITY FEED ADAPTER B".

I've searched on that part # but can't find anything.
 

MWMULES

Well-known member
Steel Soldiers Supporter
In Memorial
5,580
349
83
Location
DESOTO, KANSAS
That is a standard Steel Jerry can lid gasket. Do an online search for,
[h=1]5 Gallon Metal Jerry Can Gasket[/h]
 
Last edited:

qman

New member
3
0
0
Location
Colorado Springs, CO
negative, I do not need the Jerry can lid gasket. I have one of those.

I may have given the wrong part #. You may be right that what I listed is the Jerry Can gasket. If that's true then I got it wrong.

It might be that the o-ring is #29 "Preformed packing" part # 5330-01-172-1251.

I did a search on that part #, called Orbital products, and the guy said it was an o-ring and that they're $49 each. I started laughing. I'ts an o-ring for goodness sakes. He did say it is made from rubber flourocarbon whatever that means.
 
Last edited:

qman

New member
3
0
0
Location
Colorado Springs, CO
Thanks pal. I'm heading over to the local surplus for a $5 cap. I'm gonna figure out the o-ring and get some spares.

I might even try to sell them for $50 to the govt . . . hahahahaha. The guy at Orbital products said they had 12 and 10 were being sold to the govt. If I can find spares I might be able to strike it rich.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks