• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M211 deep water fording kit

hendersond

Well-known member
Steel Soldiers Supporter
1,171
29
48
Location
Galesville, WI
Drive 3 miles to town to the store couple times a week for a twelver of Mtn Dew, home improvement store couple times a month, salvage yard runs a couple times a month, every day for 9 days of deer hunting, family camping weekends, hauling junk, hauling firewood, to pick up things I buy on the internet.

And 1 time off the boat launch just to impress my brother hndrsonj.

More or less everywhere except the 60 mile round trip to work. OK maybe a couple times.

Seriously, The fact that it can be run underwater is interesting to me. It is like a challenge. I will try it as many times as it takes to be successful and then everything will go in a box. It just feels like it needs to be done.
 

hendersond

Well-known member
Steel Soldiers Supporter
1,171
29
48
Location
Galesville, WI
It is not water proof. I have many seals and gaskets to replace. The Wisconsin water is cooling off now. This is my winter project now. Time for research and repairs.
 

Seatyger

Member
138
0
16
Location
Ontario
If you PM me your address I will photocopy my parts list and instructions and mail them to you from the kit I obtained a while back if your still looking. Then after I get my garage organized I can lay out the parts with a steel yard stick for reference and photgraph them if necessary.

Jim
 

hendersond

Well-known member
Steel Soldiers Supporter
1,171
29
48
Location
Galesville, WI
If you PM me your address I will photocopy my parts list and instructions and mail them to you from the kit I obtained a while back if your still looking. Then after I get my garage organized I can lay out the parts with a steel yard stick for reference and photgraph them if necessary.

Jim
Jim, I'm running out of options. I will PM you my address. ANY help would be appreciated.

Pictures and measurements would be REALLY appreciated!

I found some double fording cables on ebay.
 
Last edited:
Top