- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Last time I was there, he wanted $1700 for a complete M215...
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M211 top
- Thread starter Carboarius
- Start date
- 75
- 32
- 18
- Location
- Alaska/ Wyoming
You must have caught him on a good day I guess, he was asking 2500 or so for a pretty rough incomplete m211. I will try again though, I would rather have a hard top anyway.
- 3,903
- 2,698
- 83
- Location
- Edmonton, Canada
Here is a pic of the two back window/ frames. I'll send them both down because one has a decent window, the other has a decent frame. The channels are rusty but one is straight.
Heading into the bush up north to check the other trucks so will grab some more pics. These trucks require tear-down so the price will go up unless someone else brings the tools and the strong hands.
Heading into the bush up north to check the other trucks so will grab some more pics. These trucks require tear-down so the price will go up unless someone else brings the tools and the strong hands.
USMC 00-08
Well-known member
- 1,182
- 179
- 63
- Location
- Skiatook, OK
That back window is different than the one that is in the hardtop I have. I'll try to get a pic of it this weekend.
hambone
Well-known member
- 288
- 508
- 93
- Location
- El Dorado, Ar
- 3,903
- 2,698
- 83
- Location
- Edmonton, Canada
Let's check the years of the trucks with split windows. I'm nearly certain SuperDave's 52' has the split. So far every truck I've seen up north and at the G749 farm has a single slider.
Here are a few more I snapped yesterday. These aren't in bad shape compared to the one the Goat team beat into round.
Here are a few more I snapped yesterday. These aren't in bad shape compared to the one the Goat team beat into round.
USMC 00-08
Well-known member
- 1,182
- 179
- 63
- Location
- Skiatook, OK
Mine is like hambone's.
- 3,903
- 2,698
- 83
- Location
- Edmonton, Canada
Loaded, not me, the hardtop.....soon on its way to a new truck. You have some extra parts to pick through so hopefully some of them can be passed along.
Attachments
- 1,171
- 29
- 48
- Location
- Galesville, WI
I think I have a red one. I prefer the wind on my scalp.
...And I just left Wyoming, Then yesterday I find out Someone has a engine in Cheyenne for me. Now someone gave my kids a small Payloader, All I have to do is pick it up in Custer SD.
Let me Know
...And I just left Wyoming, Then yesterday I find out Someone has a engine in Cheyenne for me. Now someone gave my kids a small Payloader, All I have to do is pick it up in Custer SD.
Let me Know
Last edited:
USMC 00-08
Well-known member
- 1,182
- 179
- 63
- Location
- Skiatook, OK
Plowboy...I pulled those panels for you today. They need a little wire wheeling, paint and some weatherstripping, but are otherwise in good shape. I'll be working on the shipping this week.
I checked with Memphis and you will need the "L type" weatherstripping. They sell it in 5 ft rolls.
I checked with Memphis and you will need the "L type" weatherstripping. They sell it in 5 ft rolls.
- 3,903
- 2,698
- 83
- Location
- Edmonton, Canada
Those are just awesome! Made my day, thank you! Goin' topless.
USMC 00-08
Well-known member
- 1,182
- 179
- 63
- Location
- Skiatook, OK
A little update here. Things have been busy around my place and I have neglected to make this post.
About the second week of November, Carboarius PM'd me and said he had an extra hardtop set aside for me. The third week of November, 1944mb was headed to my area for a business trip. Carboarius and 1944mb got in contact with each other, met up as 1944mb passed through Carboarius' area and the hardtop was sent south.
The hardtop arrived at my place on Nov. 18. 1944mb and his wife spent a little over 3 days at our place. We all had a great time. We got to play with the trucks quite a bit, pulled some parts, traded some parts, cooked out, etc. 1944mb got to drive a G749 for the first time.
Before they left, Plowboy's panels were loaded up and sent north with 1944mb where they now sit about 8 hours south of Plowboy's location. It sounds like Plowboy and 1944mb will be meeting up close to spring time.
A big thank you from me to Plowboy, Carboarius and 1944mb!!
About the second week of November, Carboarius PM'd me and said he had an extra hardtop set aside for me. The third week of November, 1944mb was headed to my area for a business trip. Carboarius and 1944mb got in contact with each other, met up as 1944mb passed through Carboarius' area and the hardtop was sent south.
The hardtop arrived at my place on Nov. 18. 1944mb and his wife spent a little over 3 days at our place. We all had a great time. We got to play with the trucks quite a bit, pulled some parts, traded some parts, cooked out, etc. 1944mb got to drive a G749 for the first time.
Before they left, Plowboy's panels were loaded up and sent north with 1944mb where they now sit about 8 hours south of Plowboy's location. It sounds like Plowboy and 1944mb will be meeting up close to spring time.
A big thank you from me to Plowboy, Carboarius and 1944mb!!
1944mb
Active member
- 417
- 110
- 43
- Location
- Big Timber, MT
Jeez I thought you were gonna post a pic of the hardtop on the truck-haha just teasing! Had a blast driving you m135!
- 75
- 32
- 18
- Location
- Alaska/ Wyoming
Glad it all worked out and transportation aligned.