- 34,012
- 1,808
- 113
- Location
- GA Mountains
RE: For sale
I may have to Wayne. I want to sell it before the other truck gets away.
I may have to Wayne. I want to sell it before the other truck gets away.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M275A2 and M447C for sale
- Thread starter Recovry4x4
- Start date
- 662
- 17
- 18
- Location
- Chino Valley, AZ
Kenny,
Sorry to see you selling the M275A2, yours is very rare, based on the year it was built. They are all fairly rare ( I believe my 67 is one of the most common years). You know, I bought and restored mine after admiring yours. I really hope it goes to a good home with a member so it can remain safe and cared for. I've included a couple pictures of mine.
Take care,
Sorry to see you selling the M275A2, yours is very rare, based on the year it was built. They are all fairly rare ( I believe my 67 is one of the most common years). You know, I bought and restored mine after admiring yours. I really hope it goes to a good home with a member so it can remain safe and cared for. I've included a couple pictures of mine.
Take care,
Attachments
papercu
Active member
- 2,930
- 31
- 38
- Location
- Baxley, Ga.
truck
How's the water tank project coming along? Wayne
How's the water tank project coming along? Wayne
- 34,012
- 1,808
- 113
- Location
- GA Mountains
RE: truck
Horrible so to speak. The trailer is so rusty the fenders have fallen off. I'm saving the tank ( Citizensoldier says he'll buy iit) and sending the rest to the chipper. Today I'll have the rest of the front axle done. I'm replacing boots, axle seals and doing the brake hose upgrade to both sides. Still no significant bites. Hate to do Ebay but it looks like its coming!
Horrible so to speak. The trailer is so rusty the fenders have fallen off. I'm saving the tank ( Citizensoldier says he'll buy iit) and sending the rest to the chipper. Today I'll have the rest of the front axle done. I'm replacing boots, axle seals and doing the brake hose upgrade to both sides. Still no significant bites. Hate to do Ebay but it looks like its coming!
- 10,350
- 75
- 48
- Location
- Meadows of Dan, Virginia
RE: truck
Did you fix the torque link problem or did I miss an update...again?
Did you fix the torque link problem or did I miss an update...again?
yorkgulch2
New member
- 205
- 1
- 0
- Location
- Idaho Springs, CO
RE: truck
Why are all of the tractors so far from Colorado??
Why are all of the tractors so far from Colorado??
papercu
Active member
- 2,930
- 31
- 38
- Location
- Baxley, Ga.
tractor
Kenny's should be a easy buy. Fly in, drive home. Wayne
- 34,012
- 1,808
- 113
- Location
- GA Mountains
RE: truck
Not yet Bjorn. Once all this stuff is done I'm going to hoist the back up and knock it loose for replacement. I have 2 new ones on the back of the unit. Yorkgulch2, She's about ready for a roadtrip! Will be going to N GA the end of the month. Looks llike a 1400 mile ride from metro Atlanta to Idaho Springs.
Not yet Bjorn. Once all this stuff is done I'm going to hoist the back up and knock it loose for replacement. I have 2 new ones on the back of the unit. Yorkgulch2, She's about ready for a roadtrip! Will be going to N GA the end of the month. Looks llike a 1400 mile ride from metro Atlanta to Idaho Springs.
papercu
Active member
- 2,930
- 31
- 38
- Location
- Baxley, Ga.
water tank
axle has been cut out from frame. Make offers or trades.
How much is scrap steel going for these days. Wayne
I have a frame, axle and a set of new shocks for sale (South Georgia)
axle has been cut out from frame. Make offers or trades.
How much is scrap steel going for these days. Wayne
- 34,012
- 1,808
- 113
- Location
- GA Mountains
RE: For sale
Finally got it out of my driveway. This week I changed the transfer case, front axle seals and boots, wheel cylinders and rubber hoses and the J pipe. This weekend I'll PM it and go through the fuel and oil filters. She's about ready to take the ride to GA or to a new home which ever comes first. I'm still on the fence with Ebay but leaning towards it. Thanks to OD Iron for all the front end boot and seal hardware. Someone will be getting a nice strong running truck.
Finally got it out of my driveway. This week I changed the transfer case, front axle seals and boots, wheel cylinders and rubber hoses and the J pipe. This weekend I'll PM it and go through the fuel and oil filters. She's about ready to take the ride to GA or to a new home which ever comes first. I'm still on the fence with Ebay but leaning towards it. Thanks to OD Iron for all the front end boot and seal hardware. Someone will be getting a nice strong running truck.
CGarbee
Well-known member
- 2,473
- 562
- 113
- Location
- Raleigh, NC
Re: water tank
I was paid six cents a pound last week for a load of old scrap M37 frames, drums, engines, etc. that I hauled over to the local yard in Raleigh, NC, in the back of my M817...papercu said:
citizensoldier
Active member
- 3,981
- 17
- 38
- Location
- Northern Michigan. Smelt City
Re: water tank
Dont need the frame or axles Wayne.. But the new shocks are tempting.. How much for those?papercu said:
- 4,763
- 1,164
- 113
- Location
- Gaithersburg, MD
I already asked, Lane. Wayne wants to sell everything together.
citizensoldier
Active member
- 3,981
- 17
- 38
- Location
- Northern Michigan. Smelt City
Heheheh .. You need those shocks dont you! I hope you get them and then I will buy that one off you in a year or two when your tired of it.. 
Shocks should still be good..lol
Shocks should still be good..lol
ida34
Well-known member
- 4,120
- 33
- 48
- Location
- Dexter, MI
Re: RE: truck
Don't forget to cut off my casting Kenny.Recovry4x4 said:
- 34,012
- 1,808
- 113
- Location
- GA Mountains
RE: Re: RE: truck
I'm going to hack off the whole tongue area. The casting part is where the landing gear locks into right?
I'm going to hack off the whole tongue area. The casting part is where the landing gear locks into right?
ida34
Well-known member
- 4,120
- 33
- 48
- Location
- Dexter, MI
RE: Re: RE: truck
You are correct. I will take a pic to show what I have but if you hack off the whole thing it should cover what I need. I appreciate you help Kenny.
Chuck
You are correct. I will take a pic to show what I have but if you hack off the whole thing it should cover what I need. I appreciate you help Kenny.
Chuck
papercu
Active member
- 2,930
- 31
- 38
- Location
- Baxley, Ga.
water
You may want to rethink selling and find a fording kit!! With the ice caps melting, this is the projected new coast line for Florida and others. Wayne
http://www.geo.arizona.edu/dgesl/re.../sea_level_rise/sea_level_rise_old.htm#images
You may want to rethink selling and find a fording kit!! With the ice caps melting, this is the projected new coast line for Florida and others. Wayne
http://www.geo.arizona.edu/dgesl/re.../sea_level_rise/sea_level_rise_old.htm#images
vtdeucedriver
Well-known member
- 2,523
- 38
- 48
- Location
- Vermont
RE: water
Desert Deuce, you get any flak about running it without rear mud flaps????????? I got them on my 5 ton but I love the look without them!!!!
Desert Deuce, you get any flak about running it without rear mud flaps????????? I got them on my 5 ton but I love the look without them!!!!
- 662
- 17
- 18
- Location
- Chino Valley, AZ
vtdeucedriver, no trouble yet, I am going to fabricate something that can be put on for hiway driving then removed. I'm going to do the same for my M52A2. I'm with ya, I like the look of the tractors without as well.