I am cleaning up my engine (M35, REO Gold Comet) and every thing i take off such as the air compressor, carborator, and exaust manifold, has ratty gaskets. i was curious as to where i may obtain a gasket set if one exists or if i have to make my own and any part numbers one might know (i had heard something about NAPA having a kit but i have not found it. any and all suggestions would be greatly appreciated.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M35 REO Gaskets!!! PLease Help
- Thread starter M35 REO
- Start date
jatonka
Well-known member
- 1,802
- 87
- 48
- Location
- Ephratah, New York
I have a complete OA-331 gasket set, you can PM me when you want to. John T
Crazyguyla
Active member
- 817
- 124
- 43
- Location
- Altus, OK
Memphis Equipment has a good selection of parts for the OA 331 Engine.
54reo
Well-known member
- 1,503
- 49
- 48
- Location
- Chester IL
What part of Illinois are you from?
Nice truck, not too many gassers left.
JT will do you right on the gasket set BTW...
Nice truck, not too many gassers left.
JT will do you right on the gasket set BTW...
JasonS
Well-known member
- 1,656
- 167
- 63
- Location
- Eastern SD
I don't have the part numbers at hand but lots of the gaskets can be had from NAPA. I had the best luck making my own oil pan and valve cover gaskets from silicone sheet. Cheapest price were from "rubberman" on ebay.
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Well, I left NAPA today and they were clueless!. NO REO PARTS!
JasonS
Well-known member
- 1,656
- 167
- 63
- Location
- Eastern SD
It is best to go to NAPA with the part numbers in-hand. I'll post tomorrow with the numbers.
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
I had the part number from a post in 05 or 06. They said it's obsolete and don't carry it anymore.
intake and exhaust valve lock 216-5146
oem type intake valve seal 216-1010
perfect circle set (requires VST-20A14 tool) *VS-6
intake and exhaust valve guide 217-3895
intake valve seat 218-8753
exhaust valve seat 218-3707
cam gear 8-3600A
crank gear 8-3601A
matched gear set 8-3602SA
full gasket set FS3146
head set HS3146
manifold set (with exhaust heated intake) MS18469
manifold set (later model) MS12199
valve cover VS39741 (the one I got was too long)
head gasket 3146
oil pan OS30987
early rod bearings 1740CP
late rod bearings 3090CP
straight shell main set 757M
Cam set 1114M
intake and exhaust valve lock 216-5146
oem type intake valve seal 216-1010
perfect circle set (requires VST-20A14 tool) *VS-6
intake and exhaust valve guide 217-3895
intake valve seat 218-8753
exhaust valve seat 218-3707
cam gear 8-3600A
crank gear 8-3601A
matched gear set 8-3602SA
full gasket set FS3146
head set HS3146
manifold set (with exhaust heated intake) MS18469
manifold set (later model) MS12199
valve cover VS39741 (the one I got was too long)
head gasket 3146
oil pan OS30987
early rod bearings 1740CP
late rod bearings 3090CP
straight shell main set 757M
Cam set 1114M
JasonS
Well-known member
- 1,656
- 167
- 63
- Location
- Eastern SD
I haven't bought reo gaskets from NAPA for a few years. Used gaskets show up on ebay once in awhile but the cork gaskets are usually garbage. Not a big deal; just make your own from silicone sheet.
I have had good luck getting oddball gaskets from Olson's Gaskets. Olson's Gaskets
I have heard good things about Best Gasket but have no experience with them. Vintage Automotive Gaskets - Head Gaskets and Rear Main Seal Gaskets - Best Gasket
I have had good luck getting oddball gaskets from Olson's Gaskets. Olson's Gaskets
I have heard good things about Best Gasket but have no experience with them. Vintage Automotive Gaskets - Head Gaskets and Rear Main Seal Gaskets - Best Gasket