- 6,983
- 2,519
- 113
- Location
- Montevideo/Uruguay
That bearing with the missing cage (your second picture) is a common 6310 NR (snap-ring style, 110x50x27mm).
You may get away with leaving the old roller bearings in place, but you better replace all 6 ball bearings on that input shaft, once you have it all apart.
(see my post #5, for the bearing numbers)
You may get away with leaving the old roller bearings in place, but you better replace all 6 ball bearings on that input shaft, once you have it all apart.
(see my post #5, for the bearing numbers)