spcroach
New member
- 1
- 0
- 0
- Location
- Glencoe/Kentucky
Is there a stock winch mount for the m35a2 that allows the warn 18,000lb mrap winch to be mounted on the deuce?
Thanks
Thanks
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M35a2 winch mount for a mrap 18,000lb winch
- Thread starter spcroach
- Start date
Derrickl112
Well-known member
- 2,654
- 84
- 63
- Location
- Southeast MI
No. There's not a stock mount. But there was a guy who put one on his m35a3
Last edited:
- 10,865
- 762
- 113
- Location
- Appomattox, VA
Time to learn them fabricating skills! Get a tape measure, welder, disc grinder and some scrap metal and make it work....
Westech
CPL
- 6,104
- 208
- 63
- Location
- cow farts, Wisconsin
Yes there is a stock mount to adapt a 50 year old military truck that has not been in Active service for a few years to a new hot off the line Winch. I have them for sale for $399.95 with free shipping.
I only take cash or Western union money orders.
I only take cash or Western union money orders.
Maverick1701
Well-known member
- 1,433
- 181
- 63
- Location
- Lubbock, TX
^lol
BadMastard
New member
- 392
- 5
- 0
- Location
- Duvall, Wa.
Don't let Westy fool you.
Those things ain't worth more than $250.
Those things ain't worth more than $250.
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
Shouldn't be too hard to fab up a mount. Let me know if you have any extras of those winches!
metalman99
Member
- 131
- 0
- 16
- Location
- Pleasant Prairie, WI
I have 5 brand new MRAP bumpers with winch mount already there, very heave duty.
Cycletek
Member
- 345
- 4
- 18
- Location
- Panguitch, Utah
Heck a couple drywall screws outta hold it on there right nicely!
caliber1
New member
- 995
- 8
- 0
- Location
- Elcho, Wisconsin
Now your goin overboard, some baleing wire and a few strips of duct tape would be plenty.Heck a couple drywall screws outta hold it on there right nicely!
- 1,703
- 400
- 83
- Location
- Leavenworth, KS
Isn't there a parts/truck dealer offering kits to mount a Warn winch up front on a Deuce? Seems like I saw one, C&C perhaps? I don't know about the bolt patterns on the winches but if you have the $$$$, the dealer has the kit.
- 65
- 19
- 8
- Location
- El Paso, Colorado
^^^^ Yup, you are correct.
I mounted an 18,000lb WARN Industrial winch using Clints CNC laser cut mounts.
I did have to run a 5/8 drill bit through the holes to get all the bolts in, but believe it may have been that my Deuce took an impact on the left front once upon a time.
The kit came complete with all the brackets, grade 8 bolts/washers/nuts, as well as the power cable to run the winch.
Was it pricey? Yes!
Was it worth it to me? Yes!
HTH
Jay
I mounted an 18,000lb WARN Industrial winch using Clints CNC laser cut mounts.
I did have to run a 5/8 drill bit through the holes to get all the bolts in, but believe it may have been that my Deuce took an impact on the left front once upon a time.
The kit came complete with all the brackets, grade 8 bolts/washers/nuts, as well as the power cable to run the winch.
Was it pricey? Yes!
Was it worth it to me? Yes!
HTH
Jay