• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

m35a3 drive shaft lengths

Kelly4x4

New member
15
8
3
Location
El Cajon Ca.
Ok here goes ,I have A m35a3 and it needs drive shafts ,the problem is the proper length for the middle and front , they keep wanting to send me a2 shafts it seems am general moved the transfer case back 2 niches for the 3116 and longer trans,, can some one pleas tell me what the proper length are or please tell witch TM I can look in ,, your help would be appreciated,, Thank you,, Bill kelly
 

Guyfang

Moderator
Staff member
Moderator
16,656
23,793
113
Location
Burgkunstadt, Germany
TRUCK, CARGO: FIXED SIDE, W/WINCH, M35A3 (2320-01-383-3850) (EIC: BHL); TRUCK, CARGO: FIXED SIDE, W/O WINCH, M35A3 (2320-01-383-2047) (EIC: BHK); TRUCK, CARGO: LONG WHEELBASE, W/WINCH, M36A3 (2320-01-383-2046) (EIC: BHN); TRUCK, CARGO: LONG WHEELBASE, W/O WINCH M36A3 (2320-01-383-2048) (EIC: BHM); TRUCK, CARGO: DROPSIDE, W/WINCH, M35A3C (2320-01-383-2049) (EIC: BHQ); TRUCK, CARGO: DROPSIDE, W/O WINCH, M35A3C (2320-01-383-2050) (EIC: BHP).


The TM9-2320-386-24P will tell you what you want to know. But first you need to tell us what NSN your truck has. Then we can use the UOC, (Usable On Code) to find the right parts. So write the NSN for your truck here.
 

fuzzytoaster

Well-known member
Steel Soldiers Supporter
4,290
3,103
113
Location
Fort Worth, Texas
9-2320-368-24P Pages 218-227 cover the shafts and subcomponents.

I checked the NSNs and PNs to try to find product dimensions but came up short. Just the typical new P/N, cost, etc.. On that note I'm parting out an A3 if want a used set.
 

Kelly4x4

New member
15
8
3
Location
El Cajon Ca.
the NSN 2320-01-383-2050 just a side note both of my a3 's are not military there civilian ,they where built and used by AM General for the H1 civilian support team and do not have a DOD Plate . I have sequential FullSizeRender.jpgthumbnail.jpg #s m35a3 SN #501067 and # 501068 I got them from Terry McClanahan when he shut down American Outfitters . i just had a shaft i got from Eastern rebuilt to find out it was 2 inches to long they sent me a a2 shaft ,so back to shaft pro and cut 2 inch out ,, thanks for the Reply ,, Kelly
 
Top