M35A3 window regulator

[DownRange762]

Just got my M35A3 yesterday and was wondering if anyone had a good exploded parts view of the window regulator/door assembly? The passenger side window is halfway down in the door and the regulator is partially dismounted by the prior owner and I'm not seeing how to remove it for repair, or how to get the glass&frame out of the door as the glass needs to be replaced as well.

The view even with the access panel is limited but I expect this is one of those once-you-see-it, it-is-simple things.

Any helpful advice would be helpful.

 

[Westech]

have you looked at any of the TM's? the 24p works most of the time for me. (parts manual)

 

[gringeltaube]

It's kind of tricky, yes..... and having long, skinny monkey arms makes it much easier to fix...

Related threads:
http://www.steelsoldiers.com/deuce/86047-help-window-removal.html
http://www.steelsoldiers.com/deuce/49958-deuce-window-regulator.html
http://www.steelsoldiers.com/deuce-modification-hot-rodding/46244-deuce-window-replacement.html

Just one of many diagrams, out of the books..... below


G.

 

[DownRange762]

Thanks Gringeltaube, the exploded view is what I needed.

Got the window and frame out as well as the regulator. The clips were in the bottom of the door, guess one had popped off prompting the prior owner to start the disassembly.

Anyone using anything other that white lithium grease after cleaning the regulator before reinstalling it?