M37 build your own harness

[P8ntgame]

I told my entire harness out, and I'm almost done running wires with the proper numerical code for the wiring diagrams. I just need this one connector number to pretty much finish it once this last connector is on all I have to do is tape up my wire harness, stick it in some wire loom and I'll be golden.... If I can find this Cannon plug.

 

[mdainsd]

I have a new one in my hand. Unfortunately, there is no number on it that represents the complete connector. There are numbers on each of the three metal portions, the plug barrel, the coupling ring and the compression fitting on the back.
The barrel is: AE8701309
The coupling ring: AE8701325
The compression fitting: AE7723308

I don't think that will get you directly where you need to be.

 

[mdainsd]

I did some more digging for you. Since I work at one of the largest mil/aero connector companies in the country I might be uniquely able to navigate mil-spec part numbers.

You want something like: Mil-

Spec Connector 4P SIZE 22 PIN PLUG STRAIGHT MIL-C-5015 (face pattern 22-22)

​

 

[P8ntgame]

I looked that up and found a picture of which would seemed to be the closest thing I've found so far!

 

[mdainsd]

Yeah, that one will work but it won't have the coupling ring you are used to seeing. Now that I got you close, number wise explore, you might find all the exact parts.

 

[P8ntgame]

Alright! Your magic numbers seemed to have worked, along with two hours of punching in numbers on Google and looking at diagrams/pictures. I believe this will work yes?

https://www.digikey.com/product-det...ns/97-3106A-22-22P/97-3106A-22-22P-ND/2510044

 

[mdainsd]

I think so! Good luck.

 

[hndrsonj]

I'd call vintage and just get the right one....