NMC_EXP
New member
- 286
- 12
- 0
- Location
- Raton, New Mexico
Greetings
I have not been on SS since I sold my M1009 and M101A2. Previously I owned a '62 M37B1 w/winch and had slowly collected some parts for it. Sadly the M37 was totally destroyed in a building fire. The only MV I have left is an M416.
During a recent relocation a lot of M37 parts came to light leading to my questions. These include three complete bow assemblies. After searching and seeing the info on garbee.net I'm positive the bow corners are M37 and not M101. These corners have the correct bolt orientation, have strap brackets and still have leather straps on them. These bows and some other items had been in dry storage at a county maintenance shed for decades.
I had found and installed a complete troop seat set for the M37B1. I'm pretty sure I test fit these bows to the truck but can't recall for certain.
Before I advertise these bows I need to verify what vehicle they are for. Had a thought they could be for the M715 or some other truck I know nothing about.
The vertical legs on these bows measure 65" center to center. The vertical height of the bow from the bottom of the vertical leg to top of the bow is about 27-1/2". I could not find dimensions on this site.
Question: Are these m/l the correct dimensions for M37 bows? If not, for which truck?
I can post photos if needed.
Thanks and best regards.
Jim
I have not been on SS since I sold my M1009 and M101A2. Previously I owned a '62 M37B1 w/winch and had slowly collected some parts for it. Sadly the M37 was totally destroyed in a building fire. The only MV I have left is an M416.
During a recent relocation a lot of M37 parts came to light leading to my questions. These include three complete bow assemblies. After searching and seeing the info on garbee.net I'm positive the bow corners are M37 and not M101. These corners have the correct bolt orientation, have strap brackets and still have leather straps on them. These bows and some other items had been in dry storage at a county maintenance shed for decades.
I had found and installed a complete troop seat set for the M37B1. I'm pretty sure I test fit these bows to the truck but can't recall for certain.
Before I advertise these bows I need to verify what vehicle they are for. Had a thought they could be for the M715 or some other truck I know nothing about.
The vertical legs on these bows measure 65" center to center. The vertical height of the bow from the bottom of the vertical leg to top of the bow is about 27-1/2". I could not find dimensions on this site.
Question: Are these m/l the correct dimensions for M37 bows? If not, for which truck?
I can post photos if needed.
Thanks and best regards.
Jim