• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

m4 machine gun pedestal legs

elsasser7122

New member
8
0
1
Location
Kansas
Does anyone here have a m4 pedestal I can get some measurements from.
I need the length&bend on rear support arms
Thanks
Lindsay
If you are mounting the M4 in a M151 I have the MWO for that. It shows the exact hole layouts and if you already have the M4 then it would just be a matter of making them from the M4 mount to the exact hole location and then you would know how to make the bends. If you need that layout let me know and I can e mail you one.
 

Lindsaym151

Member
666
12
18
Location
Eustis,FL.
Thank you gentlemen!
Any and all help will be greatly appreciated!
My vehicle is in fl.
My builder (brother in law is in Mass.
That being said , pics with measurements is vital!
 

Al Harvey

Active member
1,152
19
38
Location
Dover, TN
Here are some pictures and measurements from mine. Hope this helps along with hotdogs pics. Also I hope my descriptions make sense.

Upper width and leg width.
IMG_2454.jpgIMG_2460.jpgIMG_2455.jpg



Top to beginning of bend, end of bend to bottom.
IMG_2456.jpg IMG_2458.jpgIMG_2459.jpg


Length of the leg with the bend.
IMG_2457.jpg

Straight line length
IMG_2461.jpg
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks