Slim
New member
- 24
- 0
- 0
- Location
- Forked River, NJ
Well I've been searching the forum for some help but haven't come up with anything so here goes-
I Just obtained a roughly used (<---as you can see in my pic)M54a2 from a local construction company. Supposedly she runs (engine turns with breaker bar). The previous owner had some autozone special switch hooked up for the start button as the original switches are gone. The mickey mouse wiring and switch that they used are burnt to a crisp due to falling out of the dash and grounding on the floor of the cab. As it would be more work considering what im working with to bring it back to the way it once was, I'm just going to buy some new heavy duty switches from napa tomorrow. I was thinking along the lines of a heavy duty battery switch between the batteries and starter, and a momentary on push button to start. I am thinking correctly in doing this? How was the original setup wired, and does anybody have any pics that might help me out?
Thanks in advance,
Matt
I Just obtained a roughly used (<---as you can see in my pic)M54a2 from a local construction company. Supposedly she runs (engine turns with breaker bar). The previous owner had some autozone special switch hooked up for the start button as the original switches are gone. The mickey mouse wiring and switch that they used are burnt to a crisp due to falling out of the dash and grounding on the floor of the cab. As it would be more work considering what im working with to bring it back to the way it once was, I'm just going to buy some new heavy duty switches from napa tomorrow. I was thinking along the lines of a heavy duty battery switch between the batteries and starter, and a momentary on push button to start. I am thinking correctly in doing this? How was the original setup wired, and does anybody have any pics that might help me out?
Thanks in advance,
Matt