Greetings to all. The motor pool has grown over the weekend thanks to lots of hard work and help from the SS family here in Texas. We were able to load up and bring home a future M715 project for restoration and parts truck with not too much effort. I really appreciate the volenteers that showed up and made a hand, just shows the quality of people and now friends I have made that are here at Steel Solders. @m715mike, @Barrman, @texas30cal and Texas30calGal and my son Casey all piched in, and a special thanks to @pistolnut for selling me his trucks. All this started at the campsite at the last Brian TX event over a discussion of future plans to upgrade the 305 in the M725 to a 350, that just so happens to be sitting in the project M715. I ran it through the propper channels, which is rationalizing and justifing the purchase with my 5 year old grandson who agreed totally with the idea and tadaaa, we now have more green stuff to work on this summer. SO, plan is to pull the engine, tranny and case out of the M715, clean up and repaint, pull out 305, tranny and case in the M725 and basically swap. The M725 will go through a little more renovation and then get painted and decals installed and be made ready for fall caming and run n guns. The M715 will then be addressed and put back to original as possible and repainted. Somewhere in all this the M35 and M109 will fit in and get repairs made and be made functional. Again, many thanks to eveyone for your help.
Attachments
-
97.4 KB Views: 42
-
300.7 KB Views: 44
-
151 KB Views: 42
-
199.8 KB Views: 43
-
197.6 KB Views: 41