M812 Bridge Truck Flat bed attachement Any for sale?

[Andydieselpower]

We are looking to possibly purchase the flat bed attachment you can use to pull up on a Bridge truck. Does anyone know of any for sale and what do these typically bring for $?

Any leads would be appreicated.
thanks,
Andy

 

[rmgill]

I've seen some down at Ted Hill's place in Alabama. I'm sure there are some up in your neck of the woods.

 

[Andydieselpower]

Rmgill,
I'm not familiar with Ted. Does he have them for sale? Any contact info please PM me.
thanks,
Andy

 

[m139h2otruck]

I e-mailed Ted Hill awhile ago about the truck beds he has. They are not the M812 beds, but some type of rollback bed that is not as wide as the M812's. The bridge truck beds are over 10' wide so they will need a special permit if you run them on the road.

 

[M1075]

Those aluminum pallets have gotten hard to find. I have seen them for $5000, almost as much as the trucks, but a bridge truck has limited use without it. Here is a pic of mine.

 

[Andydieselpower]

thats the one! Well I guess the quote I received from a guy who has one for sale wasn't out of line for price. I figure just the aluminum scrap value has to be worth quite a bit so they won't go too cheap. Is there anything special about this bed for the cable hookup, underneath structure, etc? I'm tempted to have a local fab shop quote me one made out of steel. Do you happen to have dimensions and an underside picture?

Thanks,
Andy

 

[M1075]

thats the one! Well I guess the quote I received from a guy who has one for sale wasn't out of line for price. I figure just the aluminum scrap value has to be worth quite a bit so they won't go too cheap. Is there anything special about this bed for the cable hookup, underneath structure, etc? I'm tempted to have a local fab shop quote me one made out of steel. Do you happen to have dimensions and an underside picture?

Thanks,
Andy

What quote did you get?

There isn't anything too special about the beds, except of course that they were designed to work with the truck and do the job! I don't have underside pics or dimensions but could try to get you whatever your need. Basically the frame runners on the edge of the bed are what is key for loading/unloading. Also there are some "ears" on the back of the bed that the hooks on the truck are used to secure with. And the hydraulic pin lock at the front.

 

[Andydieselpower]

thanks M1075 for the pics! It looks to be fairly simple. We are being quoted $4,500 for the bed and we would have another $1,500 or so in shipping so I'm not really motivated to purchase one now. I'll have to crunch some numbers but I'm sure I could get one built for easily less than $6,000 out of steel. If you are running your M812 anytime soon if you can snap an underside pic that would be great. Thanks again for your help with the pics.

What is the most you have had on your flatbed? The dump cylinders on our hoist setups to me look like they are at a huge mechanical disadvantage.

Andy

 

[M1075]

That Mazda is the heaviest thing I have loaded on the flatbed. I believe the max payload (higway) is 20,000#. The self-loading limit is 10,000# IIRC, probably due to the winch. I think the dump cylinders would handle much more. Also, the bridge trucks can handle more weight than a standard 5 ton, as they have a beefier spring pack. The problem I found was the bed level is about 6', so the center of gravity is going to be high.

 

[jeli]

A bridge boat weights about 10K. I've seen one truck pull another out of the river with the winch cable. Not the brightest move but it worked.

 

[Offroadfabworks]

hey andy i just seen the post on this.. i think i got one of these out in the yard.. let me see and ill get you a price for one on monday. if your still interested..

 

[Andydieselpower]

Shoot me a PM on the price. Thanks,
Andy

 

[MilitaryRestoration]

did we ever find these beds? I am possibly going to be looking for one soon if I can lock up a deal on the m812 i'm looking at...

 

[jwaller]

I think seco has some. I know they have about 30 812's so reason stand they may have some of the beds too.

 

[Recovry4x4]

If SECO has them bank on the closing costs too. You will need a mortgage for them.

 

[deuceman51]

M1075, does your truck say 109GP on it by chance? It looks like one of our old bridge trucks that went for sale in SD.

 

[M1075]

M1075, does your truck say 109GP on it by chance? It looks like one of our old bridge trucks that went for sale in SD.

No I don't think so.

 

[hndrsonj]

CSI also has about 50 of the bridge trucks. They don't seem to move them very much so the price may be reasonable.