• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M813 front axle end caps shreaded spline ?

Floridianson

Well-known member
Steel Soldiers Supporter
7,409
2,503
113
Location
Interlachen Fl.
If you want to defeat the sprag, place an air valve on the line from the compressor to the sprag. Then the front end will free wheel, and you should gain some miles per gallon. Do make sure the sprag is in neutral before cutting the air supply.
Where is netrual on a sprag 809 series? Put it in reverse and it's in reverse sprag. Take it out of reverse and it's in forward sprag. Ever had the air cylinder apart to check that?

As for the axle wonder if something in the chunk went bad. Would seem if a wheel bearing went bad it would lock the hub to the spindle.
 
Last edited:
Top