M813 transfer case issues

[Ajax MD]

Yumpin' Yiminey bro!

Well, you have 3 options-
Rebuild it yourself.
Pay a commercial truck shop to rebuild it.
Buy a replacement.

People sell used takeouts all the time but of course that's a gamble. I bought a rebuilt unit still in the shipping can but that fellow retired and sold his inventory shortly after I bought mine.

 

[timgc78]

Yumpin' Yiminey bro!

Well, you have 3 options-
Rebuild it yourself.
Pay a commercial truck shop to rebuild it.
Buy a replacement.

People sell used takeouts all the time but of course that's a gamble. I bought a rebuilt unit still in the shipping can but that fellow retired and sold his inventory shortly after I bought mine.

I'll most likely fix it unless the cost of parts is more than another working unit. I haven't torn into it to see the extent of the damage yet. The oil I drained out of it was thick black and full of metal.
I'm in the lookout for a donor tranfer case for parts.

 

[Ajax MD]

I'll most likely fix it unless the cost of parts is more than another working unit. I haven't torn into it to see the extent of the damage yet. The oil I drained out of it was thick black and full of metal.
I'm in the lookout for a donor tranfer case for parts.

Hm. I may be able to help with that. I still have my old transfer. It shifted fine but the output bearings were shot for the intermediate shaft. I believe the oil drained clean and without metal bits.

PM me if you want to discuss it.

 

[timgc78]

Hm. I may be able to help with that. I still have my old transfer. It shifted fine but the output bearings were shot for the intermediate shaft. I believe the oil drained clean and without metal bits.

PM me if you want to discuss it.

I'm not sure how to PM on here. I would like to discuss that with you.

 

[Ajax MD]

I'm not sure how to PM on here. I would like to discuss that with you.

I sent you a PM to get the conversation started. You'll see a red "1" on the little envelope at the top right corner of the web page.
I just noticed you're in NC. There's a good possibility that you can just come to Maryland and pick this thing up. It'll save you the costs of freight and me the hassle of getting it to a shipper. I'll help you load it.