Lonnie
Member
- 201
- 19
- 18
- Location
- Pittsburgh, PA
Yes, but unfortunately it is almost impossible to see with the turbo & exhaust in place.
The turbo outlet points straight down, then a 90 deg silicone coupler facing the rear,
a 3.5" tube to a 90 deg coupler between cab & belle housing,
![Turbo outlet.jpg Turbo outlet.jpg](https://www.steelsoldiers.com/data/attachments/534/534907-dfcc427062770f84361dc6a75659a71b.jpg)
to a 45 deg coupler on top of belle housing, which I could not get a picture of,
then to a 90 deg coupler transitioning to a 4" at the dr. side.
![Intake.jpg Intake.jpg](https://www.steelsoldiers.com/data/attachments/534/534908-9c318a42120d359ca19c33c7619d20cc.jpg)
From there a 4" tube to a 90 deg transition at the 5" intake manifold.
All the couplers over the belle housing were connected with small pieces of tubing approx 4-5 " long.
It is a very tight fit back there but it clears nicely & allowed me to have room for Jakes on top of the engine.
The turbo outlet points straight down, then a 90 deg silicone coupler facing the rear,
a 3.5" tube to a 90 deg coupler between cab & belle housing,
![Turbo outlet.jpg Turbo outlet.jpg](https://www.steelsoldiers.com/data/attachments/534/534907-dfcc427062770f84361dc6a75659a71b.jpg)
to a 45 deg coupler on top of belle housing, which I could not get a picture of,
then to a 90 deg coupler transitioning to a 4" at the dr. side.
![Intake.jpg Intake.jpg](https://www.steelsoldiers.com/data/attachments/534/534908-9c318a42120d359ca19c33c7619d20cc.jpg)
From there a 4" tube to a 90 deg transition at the 5" intake manifold.
All the couplers over the belle housing were connected with small pieces of tubing approx 4-5 " long.
It is a very tight fit back there but it clears nicely & allowed me to have room for Jakes on top of the engine.
Last edited: