citizensoldier
Active member
- 3,981
- 17
- 38
- Location
- Northern Michigan. Smelt City
Anybody have a good drive shaft for the M880 series trucks? Or maybe two? Freeking fork truck drivers!!!!!!!!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M880 drive shaft..
- Thread starter citizensoldier
- Start date
- 3,142
- 161
- 63
- Location
- Huron National Forest, Michigan USA
I'll assume it's the rear that is bent, as the front one is harder to get with the forks.
I believe I have a rear drive shaft I could part with (as long as I have more than one spare).
I believe I have a rear drive shaft I could part with (as long as I have more than one spare).
- 3,142
- 161
- 63
- Location
- Huron National Forest, Michigan USA
Yup!
crawled under the parts M882, it still has one.
it still moves on it's own, but without brakes or steering, it really doesn't need the drive shaft.
$60 & I could pull it out and bring it to the trail ride.
crawled under the parts M882, it still has one.
it still moves on it's own, but without brakes or steering, it really doesn't need the drive shaft.
$60 & I could pull it out and bring it to the trail ride.
citizensoldier
Active member
- 3,981
- 17
- 38
- Location
- Northern Michigan. Smelt City
Yep its the rear I should have specified. If its in decent shape I'll take it.. If you have time to pull it bring it to the trail ride just give it to Dave or Andrew.. Not sure I am going yet. I will give Andrew the money. I am going to check on having one made tomorrow and see what it cost. A new one is $289 ! 
I have been just driving it around in 4 high lock without the rear.
I have been just driving it around in 4 high lock without the rear.