M880 Skid Plate

[Bob H]

I got a line on the cross member(NOS) for the skid plate, he has several. never seen a skid plate yet though.
Would be interested in 2 or 3 of them (skid plates) if anyone knows where to find them.

 

[McGuyver]

I just got mine off of a `75 or `76 W100 from the wrecking yard. Bolts right on, no problem. Be sure the cross member is the one that bolts flush against the frame with the angled cuts on the ends and not the one that has stand offs from the frame that bolts under the plate that was used on some of the `80's Dodges.

 

[Bob H]

Good tips!
These are NOS M880 cross members NSN 2510-01-121-2090, P/N 3823815
The skid plate P/N is 4213116 per my TM, yet no cross to a NSN

 

[Bob H]

http://www.tpub.com/content/logistics/25/10/37/01-146-8884.htm
shows NSN 2510-01-146-8884 & 2320-00-579-8942

hmmm........

 

[McGuyver]

Hi Bob,

I just looked up the skid plate and cross member in the TM manual for the M880. They look almost exactly like the ones I got out of the wrecking yard. I'm almost certain they are the same part. Hope that helps...

 

[busbart]

I know this is an old posting, but if there is somebody out there who has one, maybe he can take measurments to get a couple manufactured, i'm sure there is enough interest to buy them...