Jonathan M
New member
- 24
- 6
- 3
- Location
- Connecticut
Hello, I bought this truck about 3 years ago and started off good getting problems solved but then,....well life intervened and it has sat for a while. I tried to move it and a hydraulic line for the power steering had rusted through and I blew oil everywhere. Well I got the line out and took it to a place that fabricates anything hydraulic and they quoted me $262. It is a 4 foot steel tube with fittings on either end and 9 bends. I just about fell over. I called a parts supplier and they told me they can't help me without a part number. Well I have looked at exploded views until my eyes bled and I cannot find a match. It goes from the steering box along a cross member in the frame to a fitting on the inside of the frame on the passenger side. It is all steel. I will try to post pictures but it might take me a while. I'm not a regular here and must figure out your system.
Attachments
-
22 KB Views: 8
-
90.5 KB Views: 8
-
56.3 KB Views: 8
-
183.8 KB Views: 8