M923a2 and a M105A2 trailer

[Machineman]

Lookig for some info. Is the pintle height of a M923a2 to high for a M105A2 trailer?

 

[k5ontherocks]

My M931a2 and M105 line up perfectly stock.

 

[searls84]

My 923a2 and 105 on 11.00 G177s pair up perfectly.

 

[Gunzy]

No, but my M105A2 leans down in front when connected. I need to flip the lunette on it yet but it is VERY tight into the tongue.

 

[Psycho Path]

will an Oshkosh MK14 hook up to an M923a2?

 

[Coffey1]

105 looked good behind my M923A2 with super singles.

 

[Gunzy]

will an Oshkosh MK14 hook up to an M923a2?

Yes but in will lean to the front and is really heavy. You would be better off with an M1016A1 trailer.

 

[Coffey1]

M1016A1 also rides nice behind my truck.

 

[98G]

Yes but in will lean to the front and is really heavy. You would be better off with an M1016A1 trailer.

They make (or you can fabricate) a draw bar for them. Otherwise, no it won't hook up. Either way, the RBU won't be powered.

As Gunzy said, they're heavy...

I'm picking up a mk16 July 2nd, using an M923A2 as the prime mover. I'll post more on it when I have something relevant to say...

 

[Castle Bravo]

will an Oshkosh MK14 hook up to an M923a2?

I towed a MK18A1 (heavier than the MK14) with a M925A2 and a M931. Both handled it nicely. It made both trucks ride quite a bit nicer.

 

[mcmullag]

I had a M923a2 with a M105 trailer hitched to it, looked perfect, sold the set together.

 

[Carlo]

I pull a ex Bundeswher amo trailer with my M923's. The tongue is adjustable in height.

 

[DJones]

My M925a1 is almost perfect with my M105a2.

 

[Carlo]

My M925a1 is almost perfect with my M105a2.

Looks good! The trailer makes the truck stand out. Nice combination David.

 

[wreckerman893]

If you will notice on the trucks with super singles the pintal hitch sits lower than on the ones that came stock with the 1100 tires. I think there was a modification when they rebuilt the A1's into the A2's. On the older trucks the hitch went through the rear crossmember, on the newer ones it sits below the crossmember on a heavy piece of steel attached to the crossmember.

 

[DJones]

If you will notice on the trucks with super singles the pintal hitch sits lower than on the ones that came stock with the 1100 tires. I think there was a modification when they rebuilt the A1's into the A2's. On the older trucks the hitch went through the rear crossmember, on the newer ones it sits below the crossmember on a heavy piece of steel attached to the crossmember.

My truck in post #13 is actually a 1984 M925, I put the super singles on it but it has the heavy piece of steel that Wreckerman speaks of.

 

[lindsey97]

Mine hitches up and works fine. pulls nice too.

 

[Psycho Path]

Thanks everyone for the replies on the Oshkosh MK14 hook up to M923a2. I'll check out some of your suggestions. It would be nice to find an 18 - 21 foot flatbed that matches up to the bed of the M923a2. Thanks.

 

[Psycho Path]

Can't find a M1016A1.

 

[juanprado]

Can't find a M1016A1.

try m1061a1 5 ton or xm1073 7 1/2 ton