• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

m923a2 was Broke down, Montgomery AL

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,130
9,405
113
Location
Mason, TN
I can be there in the morning at 6. I texted robert but no answer yet. He has a place near there. Only member there i know is grimlock97 but he doesnt have an mv anymore

Sent from my SM-G935P using Tapatalk
 

Elijah95

Certified Rookie
1,239
1,200
113
Location
Georgia
See if this helps. Go to the air dryer and take off the spin on filter. Reach in where the filter came off there will be a cardboard looking tube. Take this out and then screw the cartridge back on.
Drier is completely bypassed, compressor pumps straight into wet tank, still 30 psi
 

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,130
9,405
113
Location
Mason, TN
Mod. Remove the 911 from the title. Ill be heading that way shortly for a recovery.

Sent from my SM-G935P using Tapatalk
 

Rmtaunton

Well-known member
1,510
31
48
Location
Smyrna, ga
He is safe and sound , still broken though but not on the side of the road . Looks like Wes is going to tow him home in the morning. Looks like it's the compressor


Sent from my iPhone using Tapatalk
 

Elijah95

Certified Rookie
1,239
1,200
113
Location
Georgia
Despite my best efforts, she isn’t running but Wes is coming to save the day. Thank you all kindly for the support, advise and moral support
 

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,130
9,405
113
Location
Mason, TN
Ive got him hooked up and shes getting drug home

Sent from my SM-G935P using Tapatalk
 
Last edited:

74M35A2

Well-known member
4,145
332
83
Location
Livonia, MI
That was very polite. Simp and I trade jabs, but in good spirit. He has touched every fastener on A1 series 923’s.

In this case, I would have pumped in air from an external source, such as a rental gasoline powered air compressor in the bed, or a 12v one running non-stop if the truck is relatively leak-free. Do as much slowing as possible via downshifting.
 

silverstate55

Unemployable
2,075
873
113
Location
UT
And that's the kind of guy Wes is, he'd give another member the shirt off of his back without having to ask for it.

Definitely the guy I'd want by my side in a crisis/critical situation.

[thumbzup]
 

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,130
9,405
113
Location
Mason, TN
That was very polite. Simp and I trade jabs, but in good spirit. He has touched every fastener on A1 series 923’s.

In this case, I would have pumped in air from an external source, such as a rental gasoline powered air compressor in the bed, or a 12v one running non-stop if the truck is relatively leak-free. Do as much slowing as possible via downshifting.
Gas powered compressors were more than i offered to come get him for. Plus air lines and fittings. Even a small 110 and a generator was even more at harbor freight .

Sent from my SM-G935P using Tapatalk
 

juanprado

Well-known member
Steel Soldiers Supporter
5,635
2,953
113
Location
Metairie/La (N'awlins)
Wes, Thank You for helping Elijah out!

I had the pleasure to meet him and his crew on the way to Port Arthur to help with Harvey. Karma has a way of working out......:clinto:
 

Jericho

Well-known member
1,180
69
48
Location
Landaff NH
Hey Simp send me your paypal to jetoneusaf@gmail.com id like to kick in a few bucks for your TOW SERVICE , I believe firmly in KARMA , serious , that could have been me so easily , experienced a "NO BUILD AIR "problem a few weeks ago Air dryer valve wouldn't seal, temp fixed it with a socket, pair of vice grips and some zip ties to get home seriously, please send it ANDY
 

Dock Rocker

Active member
980
72
28
Location
Jackson ms
Hey Simp send me your paypal to jetoneusaf@gmail.com id like to kick in a few bucks for your TOW SERVICE , I believe firmly in KARMA , serious , that could have been me so easily , experienced a "NO BUILD AIR "problem a few weeks ago Air dryer valve wouldn't seal, temp fixed it with a socket, pair of vice grips and some zip ties to get home seriously, please send it ANDY


Post up a PayPal address or shoot it to me in a PM. I want to contribute.


Sent from my iPhone using Tapatalk
 

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,130
9,405
113
Location
Mason, TN
Eli took care of me on my fuel costs guys. Was only 5.5hrs down. 2.5hrs to get him home and now i am headed home.

If you want to donate to the cause thats much appreciated. My paypal is simpson.wes.1985@gmail.com

Been a long day too. I appreciate it guys. I know alot of you would and will do the same thing to help a fellow ss member.

Wes.

Sent from my SM-G935P using Tapatalk
 

Csm Davis

Well-known member
4,166
393
83
Location
Hattiesburg, Mississippi
And that's the kind of guy Wes is, he'd give another member the shirt off of his back without having to ask for it.

Definitely the guy I'd want by my side in a crisis/critical situation.

[thumbzup]
Easy now his head might not fit in his truck any more. Naw Wes is A1, dang Energizer bunny, good show Simp.

Sent from my SM-G930V using Tapatalk
 

Elijah95

Certified Rookie
1,239
1,200
113
Location
Georgia
Y’all are an awesome family of fellow truck men, and always a good laugh reading through the posts
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks