M931a2

[Rkrug]

How hard was it to install the level winder on the winch? I think thats going to be the next thing I add.

 

[camoyj7]

Thanks thats good to know.

 

[Rkrug]

Where did you get the level winding parts at?Im looking for the tensioner unit.

 

[camoyj7]

I got the winch with level winder from Tony on the SS classifieds.

 

[camoyj7]

Made up some mud flap brackets. Still need to make up a license plate bracket and wire in a license plate light.

 

[camoyj7]

Installed all of the led lights today and mounted the license plate.

 

[camoyj7]

I mounted a boost and pyro guage in the dash. I ended up moving the heater control cables so I could keep the guages together. I just need to paint them now.

 

[TurboMustang370]

mud flap mounts look great.

 

[camoyj7]

Got off my butt and painted the truck today.

 

[HASSON1911]

Looks good how'd you do it, rattle can or spray gun. And prep work besides sanding?

 

[camoyj7]

Power washed on sat. Knocked off all of the loose paint then sanded and primed rust spots. After that painted it with a gun on the green and black. Brown is rattle can.

 

[ranchhopper]

Looks good Chuck at this rate your going to be parade ready when we start in a couple weeks.

 

[joeykunz]

Looks good man, real good.

 

[trooper632]

how much for all the LED lights and whaere did u get them

 

[camoyj7]

how much for all the LED lights and whaere did u get them

I got the headlights from the SS classifieds and the rest from that crappy auction site.

 

[Stahl1]

New to site, what is CTIS? I just bought a running
[h=1]1990 BMY, M931A2 wo/w, 5 ton 6x6, truck
tractor. Cummins 6 cylinder, diesel[/h]

 

[TurboMustang370]

Central tire inflation system. Welcome to the .org. Check out the TM section, there is days of good reading there.

 

[camoyj7]

Sure wish it would stop snowing and get warm so I could get back to work. Need to get the cab reinforcement and new cab mounts installed so I can get the LWS mount on. Still need the turret bearing.

 

[camoyj7]

Well thanks to Metalman99, Mdmorgan and e-bag. found most of the pieces I needed to finish my LWS. I'm still looking for the rear mounting pole that mounts on the rear legs and the u-bolts that mount it to the plate.

 

[camoyj7]

Still gathering pieces for the LWS. I got my new gunners sling last week. Still looking for two of the upper mount bushings in the picture.