charlesmann
Well-known member
- 700
- 713
- 93
- Location
- Temple, Tx
@KN6KXR i tore one motor down and rebuilt it. Took about 1hr after i got it opened up. Putting it back together though, i couldnt get it perfectly back aligned to where i could spin the sq drive or the output shaft by hand. So i snugged the bolts down to where the shaft would barely turn by hand, installed it, hooked my lines back up, applied hydraulics in both directions, then proceeded to tighten the bolts the rest of the way.
Operated the crane winch for bout 10 min up and down, till i noticed a lot of wobble coming out of the winch drum support halves. Resealing those will be my next major job and will rebuild the spare first, instal that one on my tck, then repeat for the one currently installed.
Operated the crane winch for bout 10 min up and down, till i noticed a lot of wobble coming out of the winch drum support halves. Resealing those will be my next major job and will rebuild the spare first, instal that one on my tck, then repeat for the one currently installed.