• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M936a1 and driveways?

Tinstar

Super Moderator
Super Moderator
Steel Soldiers Supporter
4,290
1,776
113
Location
Edmond, Oklahoma
It all depends on what PSI of concrete they poured.

Most home driveways are probably in the 3500-4000 psi range.
4” is the usual thickness.
The PSI can go over 6000, but.....as with anything, it costs more.

I specified 6000 PSI (prestressed) in my new home + shop build.
Higher inital cost, but no wishing that I did it years later.
Much stronger as you can imagine.

I have driven and parked on 4” concrete for years at home.
4000psi and zero issues.
No cracks.....nothing.

Contractors usually do a good job.
Get a bad one or a lazy helper and add too much water and you will end up with less than stellar results.

Asphalt...??
Truck tires will imprint the asphalt in the hottest part of summer easily.
Leave it sitting for extended periods of time and it will do same with cooler temps.

Lots of unknowns n
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks