I am atrying hunt down the Oil Return flexable tube for the M939A2 Cummins, two bolt turbo side and o-ring engine side.. Ours started to leak, and after looking at it close some one before us has tried to seal it with somthing, maybe JB Weld. I have looked around and can't find a Part Number to search with. Any help would be great. Thanks
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M939A2 Cummins Oil Return Tube PN
- Thread starter xGROMx
- Start date
04-09 5.9L Dodge Cummins Turbo Oil Return Line - Turbo World
Turbocharger Oil Return Line for 2004-2009 Dodge Ram 5.9L Dorman 625-212
turboworld.com
Thanks, i kept finding stuff for the 5.9 but wanted to come here, I deffenetly trust your knowledge. HA04-09 5.9L Dodge Cummins Turbo Oil Return Line - Turbo World
Turbocharger Oil Return Line for 2004-2009 Dodge Ram 5.9L Dorman 625-212
They are pretty much all the Same for turbo oil drains.
The H1E turbo is used on the 5.9s too though
simp5782, I ordered the dorman part, its a bit short. The line I have on the engine is about 22" long from the turbo to the block. The dorman part 625-212 is about 10" in length. I question if if whats on the engine even right, alot has been molested over the years. Photo below.04-09 5.9L Dodge Cummins Turbo Oil Return Line - Turbo World
Turbocharger Oil Return Line for 2004-2009 Dodge Ram 5.9L Dorman 625-212
Attachments
It's got a hose on the bottom side. Just make the hose longer. I have several that I just cut the pipe and install a hose with clamps.
- 2,655
- 2,172
- 113
- Location
- Sunman Indiana
Yeah just a 7/8" silicone hose.