Harleyrdr71
New member
- 9
- 0
- 1
- Location
- East moline, il
I picked up a 1988 m997 ambulance and it is missing the generator. Can’t figure which one I need. Can anyone help. Thank you.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M997 generator help
- Thread starter Harleyrdr71
- Start date
- 10,458
- 6,530
- 113
- Location
- Camp Wood/LC, TX
Going by memory, ambulance had 100 amp generator, old style with piggyback regulator. Those are a bit hard to find. You can put a 60 amp in or go upgrade with the 200 amp units available now.
Harleyrdr71
New member
- 9
- 0
- 1
- Location
- East moline, il
Thank you very much. I will look around.
AAVP7
Well-known member
- 217
- 262
- 63
- Location
- Dortmund, Germany
I think even early M997s had a 200 A generator, but the old one with the piggyback regulator, and only 24 volts voltage. But that´s also from memory..... 
However, about a year ago, I was at the same point, having to find the correct alternator, and a local dealer (Studentdriver) had both the early single-voltage alternator, and the newer 12/24 V one. I did a bit of research at that time what was genuine, and came up with the 200 A single-voltage one.
However, about a year ago, I was at the same point, having to find the correct alternator, and a local dealer (Studentdriver) had both the early single-voltage alternator, and the newer 12/24 V one. I did a bit of research at that time what was genuine, and came up with the 200 A single-voltage one.papakb
Well-known member
- 2,285
- 1,185
- 113
- Location
- San Jose, Ca
Unless you intend to run the resusitation pack (which is typically removed) the 60 alternator will do just fine. I've run one in my 996 for almost 20 years and have all the radio stuff installed.
AAVP7
Well-known member
- 217
- 262
- 63
- Location
- Dortmund, Germany
That´s true for sure.
By the way: I never found pics or anything about the very resucitators used on an M997. Does anybody have more information about them ? Maybe NSNs or a manufacturer or type ? Would be more useless ballast, but I like genuine, but useless stuff.....
By the way: I never found pics or anything about the very resucitators used on an M997. Does anybody have more information about them ? Maybe NSNs or a manufacturer or type ? Would be more useless ballast, but I like genuine, but useless stuff.....
Harleyrdr71
New member
- 9
- 0
- 1
- Location
- East moline, il
Thank you. Just wasn’t for sure if I could use the 60 amp. I took the ambulance body off.
Harleyrdr71
New member
- 9
- 0
- 1
- Location
- East moline, il
Is what your needing in the ambulance body that supply air? All that is still in my ambulance body I took off. Let me know.
Harleyrdr71
New member
- 9
- 0
- 1
- Location
- East moline, il
How much are you asking for th 100 amp generator?
Harleyrdr71
New member
- 9
- 0
- 1
- Location
- East moline, il
I am interested. My email is harleyrdr71 @yahoo.com. Phone number is 3097211369. Could you send some pics? Thank you.