• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M998 3L80 TRANSMISSION DOES NOT SHIFT INTO GEAR

Iambiig

Member
68
22
8
Location
Jackson, New Jersey
It is a 1993/1994 M998 with a 3L80 trans that will not shift into any gear. It used to sometimes take a minute after start up to shift, now it does not go into any gear at all. Almost felt like it had to build up pressure or vacuum when first started.

Fluid is a pretty pink, no leaks underneath. Filter was changed last year, had a little sludge, but nothing extreme.

Is this the symptom of failed modulator?

Any help would be appreciated.
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,939
9,600
113
Location
Papalote, TX
Sounds like a failed pump, modulator would not give those symptoms.
The 3l80 is an all mechanical transmission, so this is not a good sign.
 
  • Like
Reactions: rtk

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,939
9,600
113
Location
Papalote, TX
Never knew a 3l80 exist
Yep! another name for the TH-400 The TH-400 was still in production when GM went to the speed/position/load rating designations for their transmissions.
3 speed, longitudinal mounted, load class 80 (this does not mean 8,000lb as some believe)
 
Last edited:

Iambiig

Member
68
22
8
Location
Jackson, New Jersey
Yep! another name for the TH-400 The TH-400 was still in production when GM went to the speed/position/load rating designation for their transmissions.
Ok, so decided to try again. This time mashed the gas pedal before starting. Started it up and went right into reverse. Drove it around. Trans shifted nice, no problem at all. Made it kickdown, multiple times, no problem.

Maybe something to do with the kickdown?
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,939
9,600
113
Location
Papalote, TX
Ok, so decided to try again. This time mashed the gas pedal before starting. Started it up and went right into reverse. Drove it around. Trans shifted nice, no problem at all. Made it kickdown, multiple times, no problem.

Maybe something to do with the kickdown?
Interesting! I would think the kickdown circuit would do that, but I am only Youtube certified on transmissions:cool:
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks