• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M998 6.2L CORRECT STARTER

I

Iambiig

Member
71
23
8
Location
Jackson, New Jersey
Looks like the starter will need replacing soon. intermittent whizzz sound at start sometimes.

it is a '93 or '94, and the manual that I have shows 2920011687891 or MFY 6701UT. That shows to be a 13 tooth pinion gear. I also see that some starters for these have a 10 tooth gear.

Is there a way to to tell without pulling out the starter. Would like to have the starter in hand to prepare
 
M

MattNC

Well-known member
222
270
63
Location
Raleigh, NC
You shouldn't need to pull the starter to count it, just the cover over the flexplate which is maybe 4 bolts if I remember correctly. I went around in circles getting mine rebuilt then rebuilt again. Finally I just ordered a completely rebuild from the place that supplies them to the US military. It was Melton Industries
 
M

mgFray

Well-known member
Steel Soldiers Supporter
713
987
93
Location
Southern Minnesota
On my (6.5) I was able to read the label on the existing starter, and just ordered a new one. I've got the same sort of thing where it whirrls sometimes instead of starting. I've not yet had to replace it, but I've got one waiting.

My plan is to get the original rebuilt once the new one is in place, but I wasn't going to screw with an unknown rebuilt.
 
Mogman

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
7,017
9,692
113
Location
Papalote, TX
10 tooth, that's what I thought they would be, the diesel has a courser pitch (less teeth same dia..) than the gasser, the gasser uses a 13 tooth.
I had to look it up but the diesel has a 139 tooth flywheel the gasser a 168 tooth but both are the same dia.
this of course would also apply to the starter.
 
Last edited:
I

Iambiig

Member
71
23
8
Location
Jackson, New Jersey
Mogman said:
10 tooth, that's what I thought they would be, the diesel has a courser pitch (less teeth same dia..) than the gasser, the gasser uses a 13 tooth.
I had to look it up but the diesel has a 139 tooth flywheel the gasser a 168 tooth but both are the same dia.
this of course would also apply to the starter.
Click to expand...
And that would apply to all 6.2's?

this is the tag off the starter itself, still on the unit, a little beat up

IMG-6528.jpg
 
juanprado

juanprado

Well-known member
Steel Soldiers Supporter
5,635
2,953
113
Location
Metairie/La (N'awlins)
iF you need the updated starter bracket on the back as it looks more like a J than a slot, I have an extra for sale. Send me a pm
 
Mogman

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
7,017
9,692
113
Location
Papalote, TX
All HMMWV starters are interchangeable as far as I know, they are made by several different companies.
 
Mogman

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
7,017
9,692
113
Location
Papalote, TX
Iambiig said:
So, then we are saying that the 13t starter will be able to work with the diesel 139t flywheel?
Click to expand...
I do not think so, all mine are 10 tooth, where are you seeing 13 tooth starters? post a link
 
Mogman

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
7,017
9,692
113
Location
Papalote, TX
I don't know, does not look right, of course as long as the pitch was right a starter can be built with a variety of different tooth counts, but that would mean the offset compared to the block bolt pattern would be different to accommodate the number of teeth, most sellers say that their starter covers every year of the HMMWV not just two years in the middle of the run, I would search some of well known dealers like these just for example for a rebuilt starter, Hopefully someone much smarter than I will also comment here..
https://www.meltons.com/product/mss-reman-24v-hmmwv-starter-mfy-6701ut/
www.eriksmilitarysurplus.com

Starter Motor for HMMWV, MFY-6701UT / 5578787

24 volt starter motor for all versions of the military HMMWV (M998 basic/A1/A2). P/N MFY-6701UT, 5578787, 12339360. NSN 2920011687891. Motor rated 8.5 HP. Made in USA. <br> The MFY-6701UT and MFY-6714UT / 2920015077423 are interchangeable. We may supply either model MFY-6714UT or...
www.eriksmilitarysurplus.com
Also the dealer you listed has a "hidden" feedback score and it is 98.8, I try not to deal with anyone not at least in the mid 99s
Edit that dealer you cited is very large, they may be using a "stock" photo and could have also been mistaken about the number of teeth.
 
Last edited:
I

Iambiig

Member
71
23
8
Location
Jackson, New Jersey
Mogman said:
I don't know, does not look right, of course as long as the pitch was right a starter can be built with a variety of different tooth counts, but that would mean the offset compared to the block bolt pattern would be different to accommodate the number of teeth, most sellers say that their starter covers every year of the HMMWV not just two years in the middle of the run, I would search some of well known dealers like these just for example for a rebuilt starter, Hopefully someone much smarter than I will also comment here..
https://www.meltons.com/product/mss-reman-24v-hmmwv-starter-mfy-6701ut/
www.eriksmilitarysurplus.com

Starter Motor for HMMWV, MFY-6701UT / 5578787

24 volt starter motor for all versions of the military HMMWV (M998 basic/A1/A2). P/N MFY-6701UT, 5578787, 12339360. NSN 2920011687891. Motor rated 8.5 HP. Made in USA. <br> The MFY-6701UT and MFY-6714UT / 2920015077423 are interchangeable. We may supply either model MFY-6714UT or...
www.eriksmilitarysurplus.com
Also the dealer you listed has a "hidden" feedback score and it is 98.8, I try not to deal with anyone not at least in the mid 99s
Edit that dealer you cited is very large, they may be using a "stock" photo and could have also been mistaken about the number of teeth.
Click to expand...
That is interesting. Meltons is not that far away from me, and they do not list how many teeth, just that it will fit the M998. I will reach out to see if they have come across a tooth issue
 
Mogman

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
7,017
9,692
113
Location
Papalote, TX
Iambiig said:
That is interesting. Meltons is not that far away from me, and they do not list how many teeth, just that it will fit the M998. I will reach out to see if they have come across a tooth issue
Click to expand...
That would make it much easier if you had any issues, I hate carrying one around, would not even think of shipping one!
 
juanprado

juanprado

Well-known member
Steel Soldiers Supporter
5,635
2,953
113
Location
Metairie/La (N'awlins)
You must log in or register to reply here.
111,212members
165,498threads
2,328,970posts
1,454online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks