- 1,330
- 586
- 113
- Location
- Quantico VA
Made small progress
Made some progress on two issues since last update.
The brake lights not wanting to come on was a bad switch, I've removed it and can't get a good reading for continuity. So will replace.
The headlights and other lights acting funny was due to the mounting bracket of the fuel gauge nudging against the dash and shorting out. I managed to see that on visual inspection.
I realized the mounting bracket must have always been quite close and decided to put a spacer in. Looking about me I settled on the insulator shown.
Does it count as OEM correct if I found the soda cap in the backseat compartment?
Bulldogger
Made some progress on two issues since last update.
The brake lights not wanting to come on was a bad switch, I've removed it and can't get a good reading for continuity. So will replace.
The headlights and other lights acting funny was due to the mounting bracket of the fuel gauge nudging against the dash and shorting out. I managed to see that on visual inspection.
I realized the mounting bracket must have always been quite close and decided to put a spacer in. Looking about me I settled on the insulator shown.
Does it count as OEM correct if I found the soda cap in the backseat compartment?
Bulldogger