-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M998 Overhaul Plate Identification
- Thread starter GMVguy
- Start date
elkhtr
Member
- 502
- 12
- 18
- Location
- Stanwood, Wa.
Maine military authority?
Stonepicker1
Well-known member
- 2,446
- 86
- 48
- Location
- Coconut Creek, Florida
MWO 9-2320-280-20-1: Power Steering Oil Cooler Kit.
MWO 9-2329-280-34: Single caliper parking brake to dual service parking brakes.
MWO 9-2329-280-34: Single caliper parking brake to dual service parking brakes.
- 4,390
- 4,170
- 113
- Location
- Brentwood, Calif
http://www.mainemilitaryauthority.com
where many many National Guard trucks went for Overhaul and reset....
where many many National Guard trucks went for Overhaul and reset....
- 7,058
- 147
- 63
- Location
- Mid Hudson Valley NY
Im amazed that there was still a M998 without the parking brake and PS cooler MWO's still not done in 2007.....
but going back to the original question, the only people that know that answer are in Maine.. I'd call them.. Cant hurt.
but going back to the original question, the only people that know that answer are in Maine.. I'd call them.. Cant hurt.
Last edited:
greenjeepster
New member
- 1,773
- 10
- 0
- Location
- Southbury, CT
Yeah I called Maine and they confirmed it was a complete frame-off restore. Everything. New motor, driveline, everything. I found this site that explains it all pretty well.
http://www.globalsecurity.org/military/systems/ground/hmmwv-recap.htm
Thanks fellas!
http://www.globalsecurity.org/military/systems/ground/hmmwv-recap.htm
Thanks fellas!
greenjeepster
New member
- 1,773
- 10
- 0
- Location
- Southbury, CT
In the civi world we call it a "glider" when an old truck gets sent in for complete overhaul. Only it also resets the year of manufacture on the title to the year that the glider was performed. Essentially any thing that still meets spec for a new truck gets re-used and anything worn gets replaced.
Interesting, thanks. Is there anything that would be placed on the vehicle that would identify it as a 2007, rather than a 1987, for registration and identification purposes? Or should I proceed with registering it as a 1987?
- 4,390
- 4,170
- 113
- Location
- Brentwood, Calif
They didn't as a standard practice replace the data plate on reset...I have an m1035 reset in 1993, it has the original data plate. And for many reasons...you want it as old as possible, newer is not better. Registration fees, insurance, titling for Historical...
Wise advice, thanks!
greenjeepster
New member
- 1,773
- 10
- 0
- Location
- Southbury, CT
Yes you definitely want to keep the original year of manufacture. Highway safety standards only apply to vehicles that are newer than 25 years, and many states have similar rules. Also if you are using it as a display for parades and such you may want classic plates due to cost reasons.
Makes sense, thanks. The only problem I have with this is that an 87 is almost considered a classic now! Those were the days!!!
Here's an update in case it helps anyone else who has a HMMWV that went through the R&R program. I spoke with Maine and got some info:
They installed a new factory GM 6.5 engine. Transmission is new as well. All other components were remanufactured. It was a M998 2man and it was converted to a M998 4man when it left back in 2007. Complete frame off refurbishment. Frame was blasted and painted as well as rust coated.
They installed a new factory GM 6.5 engine. Transmission is new as well. All other components were remanufactured. It was a M998 2man and it was converted to a M998 4man when it left back in 2007. Complete frame off refurbishment. Frame was blasted and painted as well as rust coated.
- 283
- 117
- 43
- Location
- Mico, Texas
Here's another code from Limestone, ME....if anyone here can figure out what it means....thanx... overhaul humvee 9.2320.280.35.2 - done in 09/2001
Action
Well-known member
- 3,576
- 1,557
- 113
- Location
- East Tennessee
3-point seat belts installed.
- 283
- 117
- 43
- Location
- Mico, Texas
Thank you!