P Glen
New member
- 5
- 0
- 0
- Location
- Houston/Texas
does anyone know what would cause the turn signal light to come on but not blink? the bulb in the turn signal below the green plastic cover does not appear to come on. Many thanks for any insight.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M998 Turn Signal
- Thread starter P Glen
- Start date
- 10,458
- 6,532
- 113
- Location
- Camp Wood/LC, TX
Bad flasher module?
Action
Well-known member
- 3,576
- 1,558
- 113
- Location
- East Tennessee
didn't old cars do that if there was a bulb burned out?
P Glen
New member
- 5
- 0
- 0
- Location
- Houston/Texas
I will try replacing both the flasher module and the bulb. Thanks to you both. Have a great day!
- 1,172
- 24
- 38
- Location
- Clifton, TN
Or, they flashed really fast on the other end of the vehicle since the load on the flasher module was 1/2 of design...
dmetalmiki
Well-known member
- 5,523
- 2,028
- 113
- Location
- London England
Just replace the faulty bulb first..(one is probably lit and one not). or check the earthing of it.
jbayer
Member
- 675
- 7
- 18
- Location
- St. Aug., FL/ McGrady, NC
Yea, the earthing of it. That would be what I would check if all the bulbs are good. I like that.
P Glen
New member
- 5
- 0
- 0
- Location
- Houston/Texas
I purchased a flasher module but am having fits trying to install. Has anyone replaced one that could give me advice? Thanks.
- 10,458
- 6,532
- 113
- Location
- Camp Wood/LC, TX
Unscrew the Cannon connector shell. Unbolt flasher. Reinstall flasher. Partially insert the Cannon connector, making sure to match the keyway in the connector. Tighten the shell.