Craig A Tull
New member
- 94
- 0
- 0
- Location
- Papalote TX
OK so it appears that K1 and A1 are the same thing, only A1 has many more wires than the prints show also the prints show things like A1-5/A1-6 AND A1-7/A1-8 as diodes
If the relay is installed it blows CB2 as soon as the run switch is turned but it is not anything to do with K1 marked as A1-3 and A1-4 the contacts that "lock" the run solenoid in operating position as soon as the oil switch closes as I can run the engine fine with a jumper on TB5-7 and TP5-8 and the relay out
So where the heck are those diodes and what are all those leads on A1 connected to??????????
Thanks
If the relay is installed it blows CB2 as soon as the run switch is turned but it is not anything to do with K1 marked as A1-3 and A1-4 the contacts that "lock" the run solenoid in operating position as soon as the oil switch closes as I can run the engine fine with a jumper on TB5-7 and TP5-8 and the relay out
So where the heck are those diodes and what are all those leads on A1 connected to??????????
Thanks