MEP 802 or 803

[joeblack5]

I have 3 mep 802. One to run, Another as a backup, larger loads or if number one failes. three as parts unit for 1 and 2.
you could tie the cooling systems together as to keep the second one on temp if desired.

later j

 

[smokem joe]

My power was out yesterday. I ran AC, well, dryer, lights, and small oven on an 803 with no problem at all. Life went on as normal without having to shut off loads to do so.

 

[justicelee26]

I finally got my MEP 803A! I drove to Florida to get it but it only has 9 hours on it. It runs like a champ. I’m now waiting for the electrician to get the wiring installed so I can connect it to my house. Thank you to everyone for all of the information and helping me make my decision.

 

[csheath]

I finally got my MEP 803A! I drove to Florida to get it but it only has 9 hours on it. It runs like a champ. I’m now waiting for the electrician to get the wiring installed so I can connect it to my house. Thank you to everyone for all of the information and helping me make my decision.

Was that the one on the PC craigslist?

 

[justicelee26]

Yes it was. Thanks for the heads up!

 

[csheath]

Glad you got it and hope it works out for you.

 

[justicelee26]

Does anyone know a good place to get -5AN fittings to make an aux fuel cable?

 

[DieselAddict]

You can get JIC to hose barb fittings on Amazon pretty cheap.

 

[mavucci]

J

 

[justicelee26]

I just wanted to update everyone. My MEP 803A generator has been hooked up for a while now. It runs my entire house just like shore power. I have a 95 gallon aux fuel tank hooked to it. The aux fuel pump usually kicks on at a little over half a tank and fills it up to about 7/8. I recently ran the house for 24 hours and everything was butter smooth. It is a good feeling to know I’ve got the backup power when I need it. The hardest part was finding the fitting to hook up to the aux fuel inlet on the generator but I found one online thanks to this site.

 

[Light in the Dark]

Welcome to the club