Mep-802a compression question

[jstew0903]

Yeah those photos don't look bad at all... All the leads you see are disconnected from a single TB (genhead output) just behind the firewall near the air filter.

Look forward to more photos.

I like your optimism!


Any pointers on where the best place is to buy the missing harness parts and the relays? It's there a "junk yard" of sorts anywhere? I know the harness section that feeds the starter and the alternator are missing. Along with other relays that are the ones behind the main gauge panel.

Jason

 

[jstew0903]

He's a few more photos I had.

 

[Light in the Dark]

I like your optimism!


Any pointers on where the best place is to buy the missing harness parts and the relays? It's there a "junk yard" of sorts anywhere? I know the harness section that feeds the starter and the alternator are missing. Along with other relays that are the ones behind the main gauge panel.

Jason

I would start with the Radio Shack clearance section that appears to be your operator cube where the missing relays are! A lot of extra wires in there that appear to be taken from elsewhere and put there.

The relays and switches are readily sourceable through places like Mouser and others, or through SS user @kloppk