• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

MEP-803A Receptacle Mill & Print

Z

zapp

Member
28
31
13
Location
Ohio
I took the bag inlet and ring off my MEP-803A and drew up a simple mount for to hold a Hubble 50A receptacle. First 3D printed with ABS at 80% infill. Felt sturdy and lined up no problem. I do some hobby machining and used a piece of 6061 and milled the same part. Both seem like they would work. Probably go with the AL one after I shoot some flat paint on it. I usually print at 20% infill with Tough PLA that has been really good at dialing in dimensions.
 

Attachments

You must log in or register to reply here.
111,930members
165,863threads
2,334,754posts
1,131online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks