- 2,541
- 2,090
- 113
- Location
- Efland, NC
That sucks. Hope you can find something to get you going again.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
MEP-831A no power
- Thread starter Icesythe7
- Start date
Jeep23
New member
- 2
- 1
- 3
- Location
- Western New Jersey
Kurt,
I recall you mentioning a while back that you can convert these -831a's to a non-inverter type generator head and throttle running at a set RPM for the proper Hz. Have you any further info or experience with that? Im strongly considering converting for simplicity reasons.
I recall you mentioning a while back that you can convert these -831a's to a non-inverter type generator head and throttle running at a set RPM for the proper Hz. Have you any further info or experience with that? Im strongly considering converting for simplicity reasons.
- 2,168
- 3,604
- 113
- Location
- Pepperell, Massachusetts
Yes, I have a kit to do that exact conversion.
- New custom Governor Controller to maintain 60 Hz
- Wire Harness, Transformer Assembly, Current Sensors, Installation hardware with instructions
- Gen head not supplied. It can be ordered direct from Mecc Alte for about $450 delivered.
Custom 60Hz Governor Controller replaces the SLC100......................Showing conventional gen head on Yanmar. Still some wiring to complete in pic.
Jeep23
New member
- 2
- 1
- 3
- Location
- Western New Jersey
Thank you Kurt. How do I go about purchasing this kit form you and what is the cost?
- 2,168
- 3,604
- 113
- Location
- Pepperell, Massachusetts
PM inbound
DD58
Well-known member
- 148
- 345
- 63
- Location
- Connecticut
I actually just finished my conversation and I got my kit from Kurt. Here’s the link to my thread on it. https://www.steelsoldiers.com/threads/mep831a-conversion-time.216104/
Sent from my iPhone using Tapatalk
dav5
Active member
- 396
- 183
- 43
- Location
- Mono, Ontario
I converted mine as well. I'm very happy with the conversion and Kurt is a great guy to deal with.