Mep803a

[Ruben]

I just picked up a MEP803A, the floor pan on the inside is covered in oil and sand. I was thinking about steam cleaning the interior. Needless to say I don't plan on spraying the electronics. Thoughts?

 

[DieselAddict]

My thoughts on pressure washing anything is where the stuff you are loosening up is going to go. If you have a bunch of abrasive stuff down there I personally wouldn't want that in the alternator.

If I were going to do that I would remove all the panels and seal up everything I wanted to protect.

 

[Ruben]

Thanks for the input. I can minimize the splashing with the wand. And use the hot water to break it down.

 

[CDR]

Mine gets all goofy if I get it wet