Lindsay: Thanks for the offer, but to be quite honest I need help. I don't know that much about auto body work. I've never cracked open a can of Bondo in my life.The paint is bubbling up in a few spots - they need to be ground down and filled in. The bolts that hold the antenna brackets are rusting and need to be replaced. I'd rather the existing paint be sufficiently prepped before shooting another coat on top of it. In addition, the interior floor has surface rust due to years of leaky body gaskets. I'd like to pop the top off, pull out the seats, clean up all of the interior rust, and coat the floorboards with bed liner or something. I'm open to suggestions on what the best solution is for coating the floor.